User Manual

http://www.3jtech.com.tw

http://www.pnpipcameras.com

G2wifiIII User’s Guide

Time Zone: It is an offset time off GMT. You have to select the time zone first and then

perform time sync via NTP because the router will combine this time zone offset and

updated NTP time to come out the local time, otherwise, you will not able to get the correct

time. The router supports configurable time zone from –11 to +12 step 1 hour. Default

Time zone: -11 Hrs.

NTP Sever: NTP is Network Time Protocol and is used to sync the network time based

Greenwich Mean Time (GMT). If you manually specify an IP address of user-defined NTP

server as well as Time Zone, the router will sync the time immediately after pressing the

Apply button.

NTP Synchronization: Though it synchronizes the time automatically, NTP does not

update the time periodically without user’s processing. You can set up the time interval

(Valid range: 1 ~ 300 hours) to have the assigned NTP server do the synchronization of

time for your router.