Declaration of conformity

Declaration of Conformity
3M SVENSKA AB DECLARES THAT THE EQUIPMENT DESCRIBED HEREAFTER IS IN CONFORMITY
WITH THE FOLLOWING EUROPEAN DIRECTIVES.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Type of product/model 3M™ PELTOR™ ProTac™ Hunter Headset , green, headband MT13H223A (7100088425 / UU004690630)
Manufacturer and additional information
3M Personal Safety Division
ul. Kowalska 143, 51-424, Wroclaw, Poland
Telephone No: [phone], Telefax No: [phone]
Directive(s)
PPE (Personal Protective Equipment)
(EN) The PPE Directive applies to personal protective equipment.
This equipment is in conformity with the provisions of Council Directive 89/686/EEC and, where such is the case, with the national standard
transposing harmonized standard(s) No. EN 352-1:2002, EN 352-4:2001 +A1:2005, EN 352-6:2002, EN 352-8:2008.
This equipment is identical to the PPE which is subject of EC certificate of conformity No. 1891603 issued by PZT GmbH.
EMC (Electromagnetic compatibility)
(EN) The EMC Directive sets requirements for electromagnetic emission and immunity limits for electric/electronic products liable to generate
electromagnetic disturbance, or the performance of which are liable to be affected by such disturbance.
This equipment is in conformity with the provisions of Directive 2014/30/EU and, where such is the case, with the harmonized standards or in
other technical specifications No. EN 55022:2010 +AC:2011, EN 55024:2010, EN 55032:2012/AC:2013.
RoHS (Restriction of the use of certain hazardous substances)
(EN) The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8
June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
To meet the Directive 2011/65/EU, risk assessments have been conducted according to the harmonized standard EN 50581:2012.
LVD (Low Voltage Directive)
(EN) The LVD Directive covers all health and safety hazards, thus ensuring the product is safe while used as intended.
This equipment is in conformity with the provisions of directive 2014/35/EU and, where such is the case, with the harmonized standards or in other
technical specifications No. EN 60950-1:2006 + A11:2009 + A12:2011 + A1:2010 + AC:2011 + A2:2013.
Notified bodies
PZT GmbH, An der Junkerei 48f , 26389, Wilhelmshaven, Germany
Värnamo, September 2, 2016
Henrik Nordin, Senior Manager Technical Support, R&D
1Print date September 26, 2016