Datasheet

3M
™
PELTOR
™
Earmuffs X Series
Product description
The 3M
™
PELTOR
™
X Series Earmuffs are available in headband,
neckband and helmet mounted designs with P5E attachments.
When correctly selected and worn these products help reduce
exposure to hazardous levels ofnoise and loud sounds.
Offering a unique colour coding system to visually identify the level
of protection being worn. The attenuation values offered range
from SNR 26 dB to SNR 37 dB to meet the needs of a wide range
of environments and applications.
The helmet mounted version is designed to fit a broad range
ofindustrial safety helmets and rigid head tops featured in the
3MPowered and Supplied Air Respirator Systems (see table for
approved combination listing).
Electrically insulated (dielectric) properties:
Ŕ The metal wire of the headband version is covered
inanon‑conductive material
Ŕ The headband versions were found to be electrically insulated,
withstanding a voltage up to 1,2 kV, at an external laboratory
against a modified test method based on EN 397:2012 under dry
conditions
Ŕ The user must determine the overall suitability of this product for
the intended application taking into account any hazards other than
noise for which this product is tested and approved
NOTE: The neckband versions of the X Series are not electrically
insulated and replicate the well known 3M
™
PELTOR
™
Optime
™
steel design.
Key features
Ŕ Lightweight design (lightest version 149g)
Ŕ Twin headband designed to optimise weight distribution and
comfort with reduced heat build up
Ŕ Protected wire headband for constant headband force during
extended use providing reliable protection
Ŕ Neckband version available in all five base models
Ŕ Electrically insulated headband with no exposed wires helps
protect against electrical voltage hazards
Ŕ P5 electrically insulated helmet attachment system for easy
snapping in and out of ‘working position’
Ŕ Helmet attachment version fits directly to many safety helmets
without the need of an adapter
Ŕ Soft wide cushions helps reduce pressure around the ears
and improves comfort and wearability
Ŕ Innovative damping pads and spacer that helps improve
attenuation
Ŕ Patented sealing ring foam technology for effective seal
and protection
Ŕ Replaceable cushions and inserts
Ŕ Easy to understand different colour coding for attenuation values
tohelp select appropriate product for specific application
Ŕ Modern sleek design to encourage wear whilst ABS plastic cups
provide rigid strength and high impact resistance
Technical datasheet
X1P5E – 3M
™
PELTOR
™
X Series Earmuff
Helmet Mounted
X2P5E – 3M
™
PELTOR
™
X Series Earmuff
Helmet Mounted
X3P5E – 3M
™
PELTOR
™
X Series Earmuff
Helmet Mounted
X4P5E – 3M
™
PELTOR
™
X Series Earmuff
Helmet Mounted
X5P5E – 3M
™
PELTOR
™
X Series Earmuff
Helmet Mounted