Material Safety Data Sheet

ManualsBrands3M Personal Protective Equipment ManualsMasks & Respirators3M Particulate Welding Respirator 8512, N95 (Pack of 10)

MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13

_________________________________________________________________________________________________

Page 1 of 7

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated

under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because,

when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or

processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the

performance of the product and may present potential health and safety hazards.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

3M 8512 N95 Welding Respirator

MANUFACTURER:

DIVISION:

Occupational Health & Environ. Safety

ADDRESS:

3M Center, St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

01/11/13

Supercedes Date:

01/30/03

Document Group:

08-9598-7

Product Use:

Intended Use: Respiratory Protection

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

Polypropylene Unknown 30 - 60

Polyester Unknown 15 - 40

Cotton Unknown 7 - 13

Polyisoprene Unknown 7 - 13

Flame Retardant Unknown 3 - 7

Aluminum Unknown 3 - 7

Acrylic emulsion Unknown 3 - 7

Polyvinyl Chloride Foam Unknown 1 - 5

Silicone Emulsion Unknown 0 - 1

SECTION 3: HAZARDS IDENTIFICATION

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 Material Safety Data Sheet Copyright, 2013, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 3.1 EMERGENCY OVERVIEW Specific Physical Form: Non-Woven Material Odor, Color, Grade: White, non-woven respirator shell with aluminum noseclip and yellow headbands. No odor. General Physical Form: Solid Immediate health, physical, and environmental hazards: This product, when used under reasonable conditions and in accordance with the 3M directions for use, should not present a health hazard.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: (SCBA). Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus Unusual Fire and Explosion Hazards: Not applicable. No unusual fire or explosion hazards are anticipated. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 8.3 EXPOSURE GUIDELINES None Established SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES General Physical Form: Autoignition temperature Flash Point Flammable Limits(LEL) Flammable Limits(UEL) Boiling Point Non-Woven Material White, non-woven respirator shell with aluminum noseclip and yellow headbands. No odor.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator Carbon monoxide Carbon dioxide Ketones Toxic Vapor, Gas, Particulate 01/11/13 Not Specified Not Specified Not Specified Not Specified Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material.
PAGE 6
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 CHEMICAL INVENTORIES This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M 8512 N95 Welding Respirator 01/11/13 Section 16: NFPA hazard classification for special hazards was modified. Section 9: Flash point information was modified. Section 9: Flammable limits (LEL) information was modified. Section 9: Flammable limits (UEL) information was modified. Section 9: Autoignition temperature information was modified. Section 10: Hazardous decompostion heading was modified. Section 12: Ecotoxicological phrase was modified.