Material Safety Data Sheet

ManualsBrands3M Personal Protective Equipment ManualsMasks & Respirators3M Particulate Respirator 8233, N100

3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test

Respirators 01/29/2003

Page 1 of 6

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated

under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because,

when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or

processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the

performance of the product and may present potential health and safety hazards.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test

Respirators

MANUFACTURER:

DIVISION:

Occupational Health & Environ. Safety

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

01/29/2003

Supercedes Date:

10/01/1998

Document Group:

08-7223-4

Product Use:

Intended Use: Respiratory Protection

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

Polypropylene Unknown 40 - 70

Cotton Unknown 10 - 30

Polyisoprene Unknown 7 - 13

Polyester Unknown 7 - 13

Polyvinyl Chloride Unknown 5 - 10

Aluminum Unknown 1 - 5

Acrylic Emulsion Unknown 1 - 5

Steel Unknown 0 - 4

Ethylene/Acrylic Acid Copolymer Unknown < 1

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Summary of content (6 pages)

PAGE 1
3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 Material Safety Data Sheet Copyright, 2003, 3M Company. All rights reserved.
PAGE 2
3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 Specific Physical Form: Non-Woven Material Odor, Color, Grade: White inner and outer surfaces with a black faceseal ring and a white exhalation valve housing.
PAGE 3
M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 Flammable Limits - UEL OSHA Flammability Classification: Not Applicable Not Applicable 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.
PAGE 4
3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 8.2.4 Prevention of Swallowing Not an expected route of exposure. 8.
PAGE 5
3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 Toxic Vapor, Gas, Particulate Not Specified Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material.
PAGE 6
3M MATERIAL SAFETY DATA SHEET 8233 N100 and 8293 P100 Particulate Respirators and the Associated Qualitative Fit Test Respirators 01/29/2003 STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S.