Spec Sheet

15" 17"
Specifications MicroTouch ChassisTouch
TM
FPD Touch Monitors
FUNCTIONAL FEATURES
PHYSICAL FEATURES
LCD Technology
Display Colors
Pixel Pitch
Brightness w/o Touch Screen
Brightness w/ Touch Screen (max.)
1
Contrast Ratio
Response Time
Viewing Angle
Control Type
On Screen Display Controls
Maximum Resolution
Number of Allowable Unlit Pixels
Operating Environment
Storage Environment
Physical Dimensions (WxHxD)
(with Bezel)
Physical Dimensions (WxH)
(without Bezel)
Display Area (WxH)
Video Cable Connector
Power Supply
Power Savings
Power Consumption
Backlight Life
Weight with Bezel
Weight without Bezel
Agency Approvals
Mounting Options
Warranty
361.2 x 273.7 x 53.57 mm
14.2 x 10.78 x 2.1 inches
361.2 x 273.7 x 48 mm
14.2 x 10.77 x 1.89 inches
304.1 x 228.1 mm
11.9 x 8.9 inches
15 Pin D-Sub
12V DC Power Supply
DPMS, VESA Compliant
20 Watts Normal
20,000 hrs.
4kg/8.8 lbs.
3.3kg/7.3 lbs.
FCC B, CE, UL/cUL
2 sets of brackets, VESA 100 mm
1 year FPD
5 years touch sensor and components
TFT, Active Matrix
16.7 million
.297 mm
250 cd/m
2
Typical
215 cd/m
2
300:1 Typical
25 milliseconds
Horizontal: +/- 65 degrees minimum
Vertical: +50/-60 degrees minimum
OSD
Brightness, Contrast, Geometry,
Phase, Auto-adjust, Sharpness,
OSD control, Default, Exit
1280 x 1024
10
0 to +40 degrees C, 90%
Relative Humidity, Non-condensing
-25 to +60 degrees C
405.7 x 335.1 x 54.6 mm
15.98 x 13.18 x 2.15 inches
405.7 x 335.1 x 49 mm
15.98 x 13.18 x 1.93 inches
337.9 x 270.3 mm
13.3 x 10.6 inches
15 Pin D-Sub
12V DC Power Supply
DPMS, VESA Compliant
20 Watts Normal
17,000 hrs minimum
5.6kg/12.3 lbs
4.6kg/10.1 lbs
FCC B, CE, UL/cUL
2 sets of brackets, VESA 100 mm
1 year FPD
5 years touch sensor and components
TFT, Active Matrix
16.7 Million
.264mm
250 cd/m
2
Typical
215 cd/m
2
350:1 Typical
25 milliseconds
Horizontal: +/- 75 degrees Typical
Vertical: +65/-60 degrees Typical
OSD
Brightness, Contrast, H/V Position,
Phase, Auto-adjust, Sharpness, OSD
control, Frequency, Utility
1280 x 1024
10
0 to +40 degrees C, 90%
Relative Humidity, non-condensing
-25 to +60 degrees C
(1) Brightness measured on a display with MicroTouch capacitive C-etch sensor.
NOTE: Mechanical Drawings available for all ChassisTouch Monitors at www.3Mtouch.com
3M Touch Systems
3M Optical Systems Division
300 Griffin Brook Park Drive
Methuen, MA 01844
U.S.A.
www.3Mtouch.com
For more information on 3M touch products,
visit 3Mtouch.com or call toll-free 1-866-407-6666
Worldwide Manufacturing Plants:
Austin, Texas
Methuen, Massachusetts
Milwaukee, Wisconsin
Vancouver, BC Canada
Abingdon, UK
10% post-consumer
waste paper
Printed in USA
© 3M 2002
FPDCM-0402
MicroTouch is a trademark of 3M.
Notice: Given the variety of factors that can affect the use and performance of a 3M Touch Systems product, including that solid state equipment has operation characteristics different
from electromechanical equipment, some of which factors are uniquely within User's knowledge and control, it is essential that User evaluate the 3M Touch Systems product to determine
whether it is suitable for User's particular purpose and suitable for User's method of application. 3M Touch Systems' statements, engineering/technical information, and recommendations
are provided for User's convenience, but their accuracy or completeness is not warranted. 3M Touch Systems products are not specifically designed for use in medical devices as defined
by United States federal law. 3M Touch Systems products should not be used in such applications without 3M Touch Systems' express written consent. User should contact its sales
representative if User's opportunity involves a medical device application.
IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. 3M Touch Systems' Products are warranted to meet their published specifications from the
date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, including but not limited to any implied
warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems products are fit for User's particular purpose and
suitable for its method of production, including intellectual property liability for User's application. If a Product is proven not to have met 3M Touch Systems' warranty, then 3M Touch
Systems' sole obligation and User's and Purchaser's exclusive remedy, will be, at 3M Touch Systems' option, to repair or replace that Product quantity or to refund its purchase price. 3M
Touch Systems has no obligation under 3M Touch Systems' warranty for any Product that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing
operations or assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products for any loss or
damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted.
(11/01R2)
Product Highlights
Slim design is conducive to sleek
kiosk design trends
Robust metal enclosure provides
mounting stability and protection for
the FPD display
Available in capacitive or resistive
touch technology, suiting the needs of
most integrators
Multiple options including bezeled,
non-bezel, or industrial bezel for
flexible integration
VESA-mounting hole pattern on the
back allows for arm mount capability
TOUCH MONITORS
Slim, Compact Display offers Durable Touch Solution
MicroTouch ChassisTouch FPD monitors from 3M Touch Systems are designed for easy
integration into kiosks, industrial enclosures and other installations where compact,
touch-integrated displays are preferred. MicroTouch ChassisTouch FPD monitors offer a
more compact enclosure, better optics, lower power usage, longer life and less heat gen-
eration than traditional CRT chassis monitors. These slim profile monitors are used in
many different applications, from light industrial to point-of-sale devices to voting
machines.
When design space is limited, the slim metal case of the ChassisTouch FPD touch
monitor is ideal. Back-mounted display controls are accessible even with the monitor
sitting flush with the face of the enclosure, improving the aesthetics of your integration.
Making the Difference
The ChassisTouch FPD touch monitors are available with MicroTouch
ClearTek
capacitive touch screen technology. Capacitive technology has a proven track record of
durability and reliability in heavy usage applications. A ClearTek sensor with Industrial
(C) Etch has been tested in a laboratory environment to withstand over 225 million
mechanical touches without noticeable degradation to the surface.*
For applications that require input flexibility, including gloved-hand use, 3M Touch
Systems offers 5-wire resistive touch screen technology on ChassisTouch FPD monitors.
5-wire resistive technology has been tested in a laboratory environment to withstand
35 million mechanical touches without noticeable degradation to the surface.*
* Mechanical touches for capacitive were tested on a single x,y location and for resistive were tested on a single 1cm location, each
using a finger-like stylus of 45 durometer, “A” shore hardness, 0.5 diameter with a load of 0.46 pounds, +/- .01 pounds of force.
MicroTouch ChassisTouch
TM
FPD Touch Monitor

Summary of content (2 pages)