User's Manual
1
2
3
4
5
6
7
77
7
8
9
Reader Configuration Tool
Reader Configuration ToolReader Configuration Tool
Reader Configuration Tool
3M Toll RFID Reader 6204
3M Toll RFID Reader 62043M Toll RFID Reader 6204
3M Toll RFID Reader 6204
User’s Guide
User’s GuideUser’s Guide
User’s Guide
47
4747
47
7.1. Basic Configuration
Basic ConfigurationBasic Configuration
Basic Configuration
With the Basic Configuration functions you can perform the following:
Manage reader profiles
Set tag protocols
Setup the Ethernet/LAN configuration
Setup the serial port
Setup digital accessories
Setup antennas
Set regulatory modes
7.1.1. Configuration Page Header
Configuration Page HeaderConfiguration Page Header
Configuration Page Header
Each page displayed by the RCT has the following header.
This header provides pull-down menus for each of the configuration
function categories. Additional functions include the user login and the
currently loaded reader profile.
Login
LoginLogin
Login
The reader’s default user level is guest
guestguest
guest. However, a user can login as admin.
If not logged in as admin
adminadmin
admin, the default level is always guest
guestguest
guest.
The guest login level provides read-only access to the reader. Clients that
login in at the guest level can read the settings of the reader and can
access the tags that the reader has inventoried. Clients at this level cannot
change the configuration of the reader.
The admin login level provides read-write access to the reader. Clients that
login in at the admin level can read and write the settings of the reader and
can access the tags that the reader has inventoried.
Logout
LogoutLogout
Logout
After logging in as admin
adminadmin
admin, the Logout
LogoutLogout
Logout button logs you out of the reader.
Logging out automatically sets the login level to guest.
Profile:
Profile:Profile:
Profile:
Profile is the currently active profile in the reader. Refer to the Manage
Profiles section for detailed information on reader profiles.