User's Manual
Table Of Contents
- Preface
- Table of Contents
- Reader Overview
- Reader Equipment Installation
- Reader Startup Tool (RST) Software Installation
- Reader Operation
- Reader Startup Tool (RST)
- Embedded Reader Configuration Tool (RCT)
- Configuring Digital Inputs and Outputs
- Specifications
- Reader Specifications (General)
- Reader Ordering Information
- Reader Specifications – FCC Part 15, Industry Canada RSS 21
- Reader Specifications – FCC Part 90, Industry Canada RSS 13
- Reader Specifications – ETSI (ID4100-001-ETSI and -002-ETSI)
- Environmental Specifications
- Power Supply Specifications
- RS-232 Specifications
- Ethernet LAN Specifications
- Antenna Cable Specifications
- Internal Antenna Specifications (FCC)
- Internal Antenna Specifications (ETSI)
- Battery Specifications (Optional)
- External Antenna Specifications (FCC)
- External Antenna Specifications (ETSI)
- Bulkhead Connector/Interface Cable Pinout
- Safety and Regulatory Information
Appendix A
Using the Wiegand Interface
98
IDentity 4100 User Guide
12 Once setup is complete, save your settings in a
Profile
.
13 In the configuration header, press
Manage Profiles
.
14 The profile management page is displayed
15 Enter a profile name in the box and press
Save
.
16 Your reader configuration will be saved under this profile name and can
be quickly reloaded if the reader reboots or you lose your reader
configuration.
17 To load a profile, press the
Activate
button next to the
Profile Name
.
Save Reader Setup
Save reader setup
information as a
profile. If you need to
reboot or power down
a reader, the reader
setup can be quickly
reloaded by loading
the profile.