User's Manual
Table Of Contents
- Preface
- Table of Contents
- Reader Overview
- Reader Equipment Installation
- Reader Startup Tool (RST) Software Installation
- Reader Operation
- Reader Startup Tool (RST)
- Embedded Reader Configuration Tool (RCT)
- Configuring Digital Inputs and Outputs
- Specifications
- Reader Specifications (General)
- Reader Ordering Information
- Reader Specifications – FCC Part 15, Industry Canada RSS 21
- Reader Specifications – FCC Part 90, Industry Canada RSS 13
- Reader Specifications – ETSI (ID4100-001-ETSI and -002-ETSI)
- Environmental Specifications
- Power Supply Specifications
- RS-232 Specifications
- Ethernet LAN Specifications
- Antenna Cable Specifications
- Internal Antenna Specifications (FCC)
- Internal Antenna Specifications (ETSI)
- Battery Specifications (Optional)
- External Antenna Specifications (FCC)
- External Antenna Specifications (ETSI)
- Bulkhead Connector/Interface Cable Pinout
- Safety and Regulatory Information
Appendix B
AVI Lane Mapper
122
IDentity 4100 User Guide
Rerun Polling Interval (Method 2)
An alternate method to rerun a polling interval is as follows:
1 Double click on the desired square.
2 In the message box, press
Yes
to confirm rerunning the polling interval
for the selected square.
3 The polling period will start for that square. The data from the previous
polling interval will be lost when the polling interval is complete.
Changing the data displayed in a grid square
If a grid square is large enough, three types of data can be displayed in the
square:
h Tag read rate
h Total number of tags read
h Average RSSI.
You select which data is displayed from the
View
menu. Check marks are
displayed next to the selections. The selection can be changed at any time
and will be saved when exiting the application.
View the Reader’s Configuration
To view the Reader’s Configuration dialog, select:
View
→
Reader’s Configuration
The configuration is retrieved from the reader at the start of the Monitoring
Session or after a restart if the session data does not have any reader
configuration information. This information is saved with the test results
and also with exported results. The dialog values can not be modified.