User's Manual
Table Of Contents
- Preface
- Table of Contents
- Reader Overview
- Reader Equipment Installation
- Reader Startup Tool (RST) Software Installation
- Reader Operation
- Reader Startup Tool (RST)
- Embedded Reader Configuration Tool (RCT)
- Configuring Digital Inputs and Outputs
- Specifications
- Reader Specifications (General)
- Reader Ordering Information
- Reader Specifications – FCC Part 15, Industry Canada RSS 21
- Reader Specifications – FCC Part 90, Industry Canada RSS 13
- Reader Specifications – ETSI (ID4100-001-ETSI and -002-ETSI)
- Environmental Specifications
- Power Supply Specifications
- RS-232 Specifications
- Ethernet LAN Specifications
- Antenna Cable Specifications
- Internal Antenna Specifications (FCC)
- Internal Antenna Specifications (ETSI)
- Battery Specifications (Optional)
- External Antenna Specifications (FCC)
- External Antenna Specifications (ETSI)
- Bulkhead Connector/Interface Cable Pinout
- Safety and Regulatory Information
Appendix B
AVI Lane Mapper
IDentity 4100 User Guide
123
Displaying the data from a given grid square
There are two ways for displaying the data from a polling interval for any
given grid square:
1 Click the square in the grid
2 Select
View
→
Square’s Data
.
3 This will display the following dialog.
4 Enter the column and row of the square or click the square to
automatically fill in the column and row.
The current selected square is highlighted in yellow. Squares that
contain polling interval data will be highlighted in dark gray. Only
squares that contain polling interval data may be selected from this
dialog.
5 Double click a square to select that square, close the dialog, and
display the square’s data.
6 The data is displayed in the boxes to the right of the main screen. If a
square has no data, these boxes will be emptied. If there is a
monitoring session currently running, the screen will be updated with
the last square’s data after a polling interval.