User's Manual

1 2 3 4 5
6
7 8 9
Reader Configuration Tool
46
IDentity 4100 User Guide
Set Tag Protocol
This Set Tag Protocol page consists of two forms. The first form (top) allows
you to select which type of tags the reader will acquire or the type of
protocol(s) to utilize on the air interface. Currently, the reader can operate
with either ISO18000-6C (ISOC), ISO18000-6B (ISOB), SuperTag,
ISO10374, EASALARM,
Flex, ISOB_80K, or any combination.
Select the check box for the protocol(s) to enable and then press
Enable
Selected Protocols
to activate the protocol.
To configure protocol level parameters, select the protocol button
.
The protocol level parameters are divided into two categories: control and
physical. Control parameters configure the protocol control. Physical
parameters configure the physical air interface for the protocol.
For detailed information on each of the Control and Physical parameters,
refer to Chapter 15 – Modem Namespace of the IDentity 4100 Protocol
Reference Guide. Parameter descriptions are provided in the
modem.protocol.isoc.control and
modem.protocol.isoc.physical configuration variable sections.
Protocol Licenses
Some protocols
requirespecific licenses
or are only available with
certain reader
configurations. Contact
Sirit Customer Service
for more information