User's Manual

December 6, 2006 Proprietary Information 27
Revision 1.0
4.5.4.2 READ Sub-Command Summary Status Message
After all tags have been reported, the reader will send a final
summary status message to the host.
Figure 15 READ Sub-Command Status Message Format
Table 14 READ Sub-Command Status Field Definitions
Field Definition
STATUS CODE This field should be set to STATUS_COMPLETE
TOTAL_TAG_COUNT Total number of tags reported
MSB LSB
Message
Status Response
Status
Code
Total
Tag
Count
0x00
1 byte 2 bytes 125 bytes