User's Manual

Appendix B
IN610 DIO Interface Module
88
INfinity 610 User’s Guide
B.2. Windows 7 Driver Installation and Setup
To map the Gadget Serial driver on a Windows 7 machine, perform the
following:
1 Connect the reader to your computer using an A-B USB cable.
2 If the Gadget Serial driver is already mapped to a COM port, the
following will appear:
3 If the driver is not mapped, the
Driver Software Installation warning
will appear.
4 Select
Control Panel and click View Devices and Printers. The Gadget
Serial device should not be mapped to any COM port as follows: