User Manual

IDentity Flex Hardware Manual – Site Planning sirit
Version 2.3 Page 19
AC POWER CONNECTIONS
The reader accepts 85 to 265 VAC 47-440 Hz input power. Line, neutral and
safety ground connections are provided via the included power cord with 120
VAC three-prong plug. Check with local authorities for any additional local
regulations.
When a customer orders a unit wired for 240 VAC power, it is supplied with a
standard 120 VAC three-prong plug. If an alternative plug is required, the
customers will be required to provide their own power plug.
Use the correct wire and appropriate power and ground connections for all
connections in accordance with the local electrical regulations.
List of Materials
HARDWARE INSTALLATION TOOLS
Hardware installation will require the following tools:
Standard hand tools
Adjustable wrenches
Wire stripper
Crimping tool as per connector manufacturer’s guidelines
Digital multimeter
Soldering tools
INTERFACE / DIAGNOSTIC TOOLS
Software and configuration setup will require the following:
Laptop computer or PC running ProComm™, Windows® HyperTerminal™
or Sirit IDentity Flex Windows software.
Serial cable (Pin-to-Pin) with DB-9 male connector for connection to the
reader. DO NOT USE A NULL MODEM CABLE!
IDentity Flex Antenna part # IDFLEX-ANT-01
IDentity Flex Reader – 2-Channel or 4-Channel
Quantity 2 – 10 feet RG-58/U test cables with connectors