User Manual

IDentity Flex Hardware Manual – Installation sirit
Version 2.3 Page 25
Table 3.1 – Legend for Figure 3.4
Item
No.
Description Supplied by
SIRIT
1 U-Bolts, antenna mounting bracket, 2 per bracket
✓
✓✓
✓
2 WMB, pipe, mast or conduit used for antenna mount
3 UMB Antenna bracket half, conduit mount side
✓
✓✓
✓
4 UMB Antenna bracket half, antenna mount side
✓
✓✓
✓
5 Coaxial cables, 50 Ohm, See Table 2.1 (p. 17)
6 Concrete lag bolts or screws and cable clamps
7 Bracket pinning bolts, 2 required
✓
✓✓
✓
8 Nuts for U-bolts, 4 per bracket
✓
✓✓
✓
9
IDentity Flex antenna assembly, shown facing down
✓
✓✓
✓
10 Bracket mounting nuts, ¼-20, 4 per bracket
✓
✓✓
✓
11 Alternate studs, for various mounting options
✓
✓✓
✓
12 Coaxial Type-N connector, see Table 2.2 (p. 18)
13 NEMA 4X Enclosure or utility waterproof housing
✓
✓✓
✓
14
IDentity Flex power supply
✓
✓✓
✓
15 Coaxial Mini-UHF connector, see Table 2.2 (p. 18)
16
IDentity Flex reader, showing one antenna connected
✓
✓✓
✓
17 Conduit or cable bushing in NEMA box
18 Wiegand or interface lines to controlled circuits
19 Multi-conductor cable fan-out to interfaces
20 AC power line to service panel
21 AC power line terminal strip