MSDS

3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 01/21/14
__________________________________________________________________________________________
Page 6 of 12
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Odor, Color, Grade:
Slight odor. Clear.
Odor threshold
No Data Available
pH
No Data Available
Melting point
No Data Available
Boiling Point
244 ºF
Flash Point
> 200 ºF [Test Method: Closed Cup] [Details: No flash to
boiling point.]
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
1.128 g/ml
Specific Gravity
1.128 [Ref Std: WATER=1]
Solubility In Water
No Data Available
Solubility in Water
Negligible
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
43.0 % weight [Test Method: Calculated]
Volatile Organic Compounds
903 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
80.0 % weight [Test Method: calculated per CARB title 2]
Percent volatile
9.7 % weight
VOC Less H2O & Exempt Solvents
913 g/l [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Light
Sparks and/or flames
Temperatures above the boiling point
10.5. Incompatible materials
Strong oxidizing agents
Alkali and alkaline earth metals
Strong acids
10.6. Hazardous decomposition products
Substance Condition