3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Safety Data Sheet Copyright,2019,3M Company. All rights reserved.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Danger Symbols Flame | Skull and crossbones | Exclamation mark | Health Hazard | Pictograms Hazard Statements Flammable liquid and vapor. Toxic if inhaled. Causes eye irritation. May cause drowsiness or dizziness. Suspected of causing cancer.
M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Call a POISON CENTER or doctor/physician if you feel unwell. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. Storage: Store in a well-ventilated place. Keep cool. Store locked up. Keep container tightly closed.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Closed containers exposed to heat from fire may build pressure and explode. 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C for the component. Ingredient Styrene Monomer C.A.S. No. 100-42-5 Agency ACGIH Limit type TWA:20 ppm;STEL:40 ppm Styrene Monomer 100-42-5 OSHA TWA:100 ppm;CEIL:200 ppm 06/04/19 Additional Comments A4: Not class.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 Carcinogenicity Serious eye damage or eye irritation Specific target organ toxicity (single or repeated exposure) Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No Styrene Monomer % by Wt 100-42-5 Trade Secret 15 - 40 15.2. State Regulations Contact 3M for more information. California Proposition 65 Ingredient C.A.
3M™ Bondo® Fiberglass Resin for Fiberglass Resin Kit, P.N. 420, 420C, 420ES, 420T, 422, 422C 06/04/19 completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from3M 3M USA SDSs are available at www.3M.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Safety Data Sheet Copyright,2019,3M Canada Company All rights reserved.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Specific Target Organ Toxicity (single exposure): Category 1. Specific Target Organ Toxicity (single exposure): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Flame | Skull and crossbones | Exclamation mark | Health Hazard | Pictograms Hazard statements Flammable liquid and vapour. Toxic if inhaled. Causes eye irritation.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C SECTION 3: Composition/information on ingredients This material is a mixture. Ingredient POLYMER 2 Styrene Monomer POLYMER 1 C.A.S. No. Trade Secret 100-42-5 Trade Secret % by Wt 30 - 60 Trade Secret * 15 - 40 Trade Secret * 7 - 13 Trade Secret * Common Name Not Applicable Benzene, ethenylNot Applicable *The actual concentration of this ingredient has been withheld as a trade secret.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C 6.2. Environmental precautions Avoid release to the environment. bodies of water. For larger spills, cover drains and build dikes to prevent entry into sewer systems or 6.3. Methods and material for containment and cleaning up Cover spill area with a fire-extinguishing foam. An appropriate aqueous film forming foam (AFFF) is recommended.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. protection(s) are recommended: Indirect Vented Goggles The following eye/face Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Heat Sparks and/or flames 10.5.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C May be harmful if swallowed. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May cause additional health effects (see below). Additional Health Effects: Single exposure may cause target organ effects: Auditory Effects: Signs/symptoms may include hearing impairment, balance dysfunction and ringing in the ears.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Styrene Monomer Inhalation auditory system May cause damage to organs though prolonged or repeated exposure May cause damage to organs though prolonged or repeated exposure Some positive data exist, but the data are not sufficient for classification Not classified Multiple animal species Mouse NOAEL 1.3 mg/l not available Styrene Monomer Inhalation liver LOAEL 0.
3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C Contact 3M for more information. The components of this material are in compliance with the provisions of the Korea Chemical Control Act. Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification and Assessment Scheme (NICNAS).
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Fiche santé sécurité Droits d’auteur.2019, Compagnie 3M Tous droits réservés.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Grave problème/Irritation oculaire : Catégorie 2B : Carcinogénicité : Catégorie 2. Toxicité pour certains organes cibles (exposition unique) Toxicité pour certains organes cibles (exposition unique) Toxicité pour certains organes cibles (exposition répétée) Catégorie 1. Catégorie 3. Catégorie 1. 2.2.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Éliminer les contenus/contenants conformément aux règlements locaux, régionaux, nationaux et internationaux applicables. 2.3. Autres risques Aucun connu. 64% du mélange consiste en des ingrédients de toxicité orale aiguë inconnue. SECTION 3 : Composition/renseignements sur les ingrédients Ce matériau est un mélange.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C L'eau n'est pas un moyen d'extinction efficace. Cependant, on peut l'utiliser pour éviter l'échauffement des récipients et des surfaces exposés au feu et éviter les ruptures par explosion. SECTION 6 : Mesures à prendre en cas de rejet accidentel 6.1.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Ingrédient STYRENE Numéro CAS 100-42-5 Agence Type de limite ACGIH MPT:20 ppm;STEL:40 ppm Mentions additionnelles ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer Recommended Guideline MPT : moyenne pondérée dans le temps STEL : Limite d’exposition de courte durée
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Vitesse d'évaporation : Inflammabilité (solide, gaz) Limites d'explosivité (LIE) Limites d'explosivité (LSI) pression de vapeur Densité de vapeur Densité Densité relative Hydrosolubilité Solubilité (non-eau) Coefficient de partage : n-octanol/eau Température d'inflammation spontanée Température de décomposition Viscosité : Composés Organiques Volatils Composés O
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C symptômes de l'exposition. Une cause possible est qu'un ingrédient peut être présent en dessous du seuil d'étiquetage un ingrédient peut être indisponible pour l'exposition ou les données ne s'appliquent pas au produit dans son ensemble. 11.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C Toxicité aigue Nom Produit général Voie Dermale Produit général Inhalation Vapeur(4 h) Ingestion Produit général Espèces Valeur Pas de données disponibles. Calculé ETA2 000 - 5 000 mg/kg Pas de données disponibles. Calculé ETA2 - 10 mg/l Rat Rat Pas de données disponibles.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C STYRENE Inhalation Non classifié pour la reproduction des femelles Rat STYRENE Inhalation Non classifié pour la reproduction masculine Rat STYRENE Ingestion Non classifié pour la reproduction masculine Rat STYRENE Ingestion Non classifié pour la développement Rat STYRENE Inhalation Non classifié pour la développement Multiple espèces animales.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C une classification. Non classifié Rat Système endocrinien Non classifié Rat Inhalation système respiratoire Non classifié STYRENE Inhalation Non classifié STYRENE Ingestion cœur | tube digestif | des os, des dents, des ongles et/ou les cheveux | muscles | rénale et / ou de la vessie Système nerveux Multiple espèces animales.
Résine renforcée de fibre de verre pour trousse(s) de résine renforcée de fibre de verre Bondo 3M(MC) - NP 420, 420C, 420ES, 420K, 420T, 422, 422C 15.1. Réglementation/législation particulière à la substance ou au mélange en matière de sécurité, de santé et d'environnement Statut des inventaires Contacter 3M pour plus de renseignements. Les composants de ce matériau sont conformes aux dispositions de la Korean Toxic Chemical Control Law (loi coréenne de réglementation des produits chimiques toxiques).
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Flame | Corrosion | Exclamation mark | Pictograms Hazard Statements Heating may cause a fire. Harmful if swallowed. Causes serious eye damage. Causes severe skin burns and eye damage. Harmful if inhaled. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep away from clothing and other combustible materials.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 SECTION 3: Composition/information on ingredients Ingredient Dimethyl Phthalate Methyl Ethyl Ketone Peroxide Phlegmatizer Methyl Ethyl Ketone Hydrogen Peroxide Water C.A.S. No.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 prevent explosive rupture. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 Flammable Limits(UEL) Vapor Pressure Vapor Density Density Specific Gravity Solubility In Water Solubility in Water Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Hazardous Air Pollutants Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents No Data Available No Data Available >1 1.1 g/ml 1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May cause additional health effects (see below).
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 15.1. US Federal Regulations Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No Dimethyl Phthalate 131-11-3 % by Wt 30 - 60 15.2.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 04/15/15 determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 Safety Data Sheet Copyright,2019,3M Canada Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 2.2. Label elements Signal word Danger Symbols Flame | Corrosion | Exclamation mark | Pictograms Hazard statements Heating may cause a fire. Harmful if swallowed. Causes severe skin burns and eye damage. Precautionary statements General: Keep out of reach of children. Read label before use. If medical advice is needed, have product container or label at hand.
3M™ Bondo® MEKP Liquid Hardener, P.N. Methyl Ethyl Ketone Peroxide Phlegmatizer Methyl Ethyl Ketone Hydrogen Peroxide Water 411, 609, 912, 912M, 912C, 912ES, 7653081 1338-23-4 Trade Secret 78-93-3 7722-84-1 7732-18-5 15 - 40 Trade Secret * 10 - 30 <3 0.1 - 1.0 Trade Secret * <3 2-Butanone, peroxide Not Applicable 2-Butanone Hydrogen peroxide (H2O2) Water Phlegmatizer is a non-hazardous Trade Secret material according to WHMIS criteria.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 Decomposition temperature Viscosity Volatile Organic Compounds Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents No Data Available No Data Available 39 g/l [Test Method:calculated SCAQMD rule 443.1] 3.5 % weight [Test Method:Tested per ASTM protocol] 45 % weight 39 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 10.1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 Corrosive (Skin Burns): Signs/symptoms may include localized redness, swelling, itching, intense pain, blistering, ulceration, and tissue destruction. Eye Contact: Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing, ulcerations, significantly impaired vision or complete loss of vision. Ingestion: Harmful if swallowed.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 on this material and/or its components. SECTION 12: Ecological information No data available. SECTION 13: Disposal considerations Dispose of contents/ container in accordance with the local/regional/national/international regulations. SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1.
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081 in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations. HMIS® IV ratings are to be used with a fully implemented HMIS® IV program. HMIS® is a registered mark of the American Coatings Association (ACA). Document group: 24-2129-5 Version number: 8.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et Fiche santé sécurité Droits d’auteur.2019, Compagnie 3M Tous droits réservés.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et Grave problème/Irritation oculaire : Catégorie 1. Corrosion/Irritation cutanée : Catégorie 1C : 2.2. Éléments d'étiquette Terme d'avertissement Danger Symboles : Flamme | Corrosion | Point d'exclamation | Pictogrammes Mentions de danger Risque de feu sous l'effet de la chaleur. Nocif en cas d'ingestion. Provoque des brûlures de la peau et des lésions oculaires graves.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et Ce matériau est un mélange. Ingrédient Phtalate de diméthyle Méthyléthylcétone Flegmatisant Méthyle éthyle cétone Peroxyde d'hydrogène Eau Numéro CAS 131-11-3 1338-23-4 Secret Fabrication 78-93-3 7722-84-1 7732-18-5 % par poids 30 - 60 15 - 40 Secret Fabrication * 10 - 30 <3 0.1 <3 1.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et 5.3. Équipement de protection spécial pour le personnel préposé à la lutte contre le feu L'eau n'est pas un moyen d'extinction efficace. Cependant, on peut l'utiliser pour éviter l'échauffement des récipients et des surfaces exposés au feu et éviter les ruptures par explosion. SECTION 6 : Mesures à prendre en cas de rejet accidentel 6.1.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 Peroxyde d'hydrogène Méthyle éthyle cétone 7722-84-1 78-93-3 ACGIH ACGIH 411, 609, 912, 912M, 912C, 912ES et MPT:1 ppm MPT:200 ppm;STEL:300 ppm ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer Recommended Guideline MPT : moyenne pondérée dans le temps STEL : Limite d’exposition de courte durée C : Valeur plafond 8.2.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 Vitesse d'évaporation : Inflammabilité (solide, gaz) Limites d'explosivité (LIE) Limites d'explosivité (LSI) pression de vapeur Densité de vapeur Densité Densité relative Hydrosolubilité Solubilité (non-eau) Coefficient de partage : n-octanol/eau Température d'inflammation spontanée Température de décomposition Viscosité : Composés Organiques Volatils Composés Organiques Volatils Pourcentage de matières volatiles COV (mo
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et classifications de certains ingrédients sont attribuées par une autorité compétente. En outre, les données toxicologiques de certains ingrédients peuvent ne pas être reprises dans la classification du produit et/ou les signes et symptômes de l'exposition.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et d'Inde Rat LC50 > 8 mg/l Rat Lapin Rat LD50 > 3 200 mg/kg LD50 > 8 050 mg/kg LC50 34,5 mg/l Rat Lapin Rat LD50 2 737 mg/kg LD50 > 2 000 mg/kg LC50 2 mg/l Rat LD50 Nom Espèces Valeur Méthyléthylcétone Méthyle éthyle cétone Peroxyde d'hydrogène Lapin Lapin Lapin Corrosif Irritation minimale.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 Peroxyde d'hydrogène Ingestion espèces animales . Mouris 411, 609, 912, 912M, 912C, 912ES et données ne sont pas suffisantes pour justifier une classification. Certaines données positives existent, mais ces données ne sont pas suffisantes pour justifier une classification.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 Méthyle éthyle cétone Ingestion Peroxyde d'hydrogène Inhalation Peroxyde d'hydrogène Ingestion 411, 609, 912, 912M, 912C, 912ES et rénale et / ou de la vessie irritation respiratoires Non classifié Rat Peut irriter les voies respiratoires. Humain Système nerveux Certaines données positives existent, mais ces données ne sont pas suffisantes pour justifier une classification.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et SECTION 13 : Considérations relatives à l'élimination Éliminer les contenus/contenants conformément aux règlements locaux, régionaux, nationaux et internationaux. SECTION 14 : Renseignements sur le transport Pour l'informations de transport, s'il vous plaît visitez http://3M.com/Transportinfo ou par téléphone 1-800-364-3577 ou 651737-6501.
Durcisseurs liquides à base de peroxyde de méthyléthylcétone Bondo® 3M(MC), NP 7653081 411, 609, 912, 912M, 912C, 912ES et Groupe de document : 24-2129-5 Numéro de la version : 7.00 Date de parution : 2019/05/21 Remplace la version datée de : 2017/04/06 Les renseignements contenus dans la présente fiches de données de sécurité (FDS) étaient jugés exacts au moment de la publication.