Datasheet

ManualsBrands3M ManualsConnectorsMDR plug 14 Male Solder Cup / Solder Lug/Straight

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

Mini D Ribbon (MDR) Connectors

.050" Solder Plug Connector - Shielded 101 Series

Wiper-on-wiper contact for reliable repetitive •

plugging

Solder cup termination requires no special tooling•

Accepts a wide variety of discrete wire (24 to 30 •

AWG) cable construction

Contacts: 14, 20, 26, 36, 40 and 50•

See Regulatory Information Appendix (RIA) for •

chemical compliance information

Date Modied: June 1, 2008 TS-0669-C

Sheet 1 of 2

Physical

Insulation Material:

Glass Reinforced Polyester

Flammability: UL 94V-0

Color: Black

Contact Material:

Copper Alloy

Plating:

Underplating: 80 μ" [ 2.0 μm ] Nickel

Wiping Area: Gold (see ordering information)

Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply)

Shroud Material:

Steel

Plating: Nickel

Wire Accomodation: 24, 26, 28 & 30 AWG

Marking: 3M Logo and Part Number

Electrical

Current Rating:

1 A

Insulation Resistance:

>1 x 10

Ω at 500 V

Withstanding Voltage:

500 V

RMS

for 1 minute

Environmental

Temperature Rating:

-55°C to +105°C

Solder Process:

360°C max for 10 sec. max

UL File No.: E68080

Summary of content (5 pages)

PAGE 1
3M™ Mini D Ribbon (MDR) Connectors .
PAGE 2
3M™ Mini D Ribbon (MDR) Connectors .050" Solder Plug Connector - Shielded 101 Series Dimensions Contact Quantity A B 14 .300 [ 7.62 ] .54 [ 13.8 ] .72 [ 18.2 ] 20 .450 [ 11.43 ] .69 [ 17.6 ] .87 [ 22.0 ] 26 .600 [ 15.24 ] .85 [ 21.5 ] 1.02 [ 25.8 ] 36 .850 [ 21.59 ] 1.09 [ 27.8 ] 1.27 [ 32.2 ] 40 .950 [ 24.13 ] 1.19 [ 30.3 ] 1.37 [ 34.7 ] 50 1.200 [ 30.48 ] 1.44 [ 36.7 ] 1.62 [ 41.1 ] 20, 36 & 40 Position .100 [ 2.54 ] Position Position 1 C C 14, 26 & 50 Position .09 [ 2.
PAGE 3
Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC.
PAGE 4
Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
PAGE 5
Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.