Cut Sheet

3M™ Scotchlok™
Copper Compression
Connectors, 10000
and 11000 Series
Data Sheet June 2011
Description
3M™ Scotchlok™ Copper Compression Connectors, 10000 Series are one-piece,
standard-barrel, seamless copper connectors and are designed to cover a wide range
of conductor sizes from 6 AWG through 1000 kcmil (MCM). The 11000 Series are one-
piece, seamless, long-barrel copper connectors and are designed to cover a range of
conductor sizes from 2/0 AWG through 1000 kcmil (MCM). They are designed to
connect copper conductors. Each connector is electro-tin plated to resist electrolytic
corrosion. They are installed using standard industry tooling. Chamfered ends and an
integral center cable stop ensure simplicity and ease of conductor insertion.
Agency Approvals
and Self
Certifications
UL Listed, UL 486A-486B Standard, File No. E23438
CSA Certified, File No. 015503
Features
 Simple installation using readily available tools
 Integral center cable stop
 Manufactured using tin-plated copper
 Color coded printing for easy connector identification
Applications
 Standard-Barrel: To connect copper conductors from 6 AWG through 1000 kcmil
(MCM)
 Long-Barrel: To connect copper conductors from 2/0 AWG through 1000 kcmil
(MCM)
 For low and medium voltage up to 35kV
 For indoor and outdoor use
Typical Properties
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
The 10000 and 11000 Series connectors, when crimped with approved die sets, can be
used on cables with an operating temperature of 194
o
F (90
o
C) and an emergency
overload rating of 266
o
F (130
o
C). The connectors pass the requirements of UL486A
(Underwriters Laboratories standard for safety) and are CSA Certified. The current
rating of these connectors meets or exceeds the current rating of the conductor size for
which it is intended.
1 of 4 3