MSDS

MATERIAL SAFETY DATA SHEET SHARPSHOOTER(TM) EXTRA STRENGTH NO RINSE MARK REMOVER 03/30/11
_________________________________________________________________________________________________
Page 1 of 7
Material Safety Data Sheet
Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
SHARPSHOOTER(TM) EXTRA STRENGTH NO RINSE MARK REMOVER
MANUFACTURER:
3M
DIVISION:
Building & Commercial Services Division
ADDRESS:
3M Center, St. Paul, MN 55144-1000
EMERGENCY PHONE: [phone] or [phone] (24 hours)
Issue Date:
03/30/11
Supercedes Date:
01/19/10
Document Group:
19-7627-3
Product Use:
Specific Use: This no-rinse cleaner removes tough stains such as grease, lipstick, crayon, black heel
marks, pencil marks and smoke film from most washable hard surfaces.
Intended Use: Hard Surface Cleaner
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
WATER 7732-18-5 80 - 95
2-BUTOXYETHANOL 111-76-2 3 - 7
ETHANOLAMINE 141-43-5 1 - 5
ALCOHOLS, C6-12, ETHOXYLATED 68439-45-2 0.5 - 1.5
ALCOHOLS, C12-14-SECONDARY, ETHOXYLATED 84133-50-6 0.5 - 1.5
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Clear, colorless; mild solvent odor
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: Contact with aluminum or zinc in a pressurized system may generate
hydrogen gas which could create an explosion hazard. May cause chemical eye burns. May cause target organ effects.