Safety Data Sheet

ManualsBrands3M ManualsPower & Hand ToolsOrbital Sander - Elite Series Air-Powered, Central Vacuum, 2-3/4 x 7-3/4 Inch, 1/8" Orbit

3M™ Power Tools with Air Tool Lubricant, Back-up Pads; Elite's 02/23/15

________________________________________________________________________________________________________

Page 1 of 1

Safety Data Sheet

provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither

the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group:

30-1105-3

Version Number:

1.08

Issue Date:

02/23/15

Supercedes Date:

08/11/14

Product identifier

3M™ Power Tools with Air Tool Lubricant, Back-up Pads; Elite's

Recommended use

Power Tools and Tool Lubricant for use with abrasives

Supplier's details

MANUFACTURER:

DIVISION:

Abrasive Systems Division

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

Emergency telephone number

1-800-364-3577 or (651) 737-6501 (24 hours)

This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data

Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included.

Please do not separate the component documents from this cover page. The document numbers for components of this

product are:

23-4623-7

DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF

TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of

use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely

within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a

particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may

have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.

In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M

3M USA SDSs are available at www.3M.com

Summary of content (11 pages)

PAGE 1
3M™ Power Tools with Air Tool Lubricant, Back-up Pads; Elite's 02/23/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
3M™ Air Tool Lubricant 05/14/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 3
M™ Air Tool Lubricant 05/14/15 Hazard Statements May cause an allergic skin reaction. Harmful if inhaled. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Precautionary Statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves.
PAGE 4
3M™ Air Tool Lubricant 05/14/15 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth.
PAGE 5
3M™ Air Tool Lubricant 05/14/15 Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible. SECTION 7: Handling and storage 7.1. Precautions for safe handling For industrial or professional use only.
PAGE 6
3M™ Air Tool Lubricant 05/14/15 None required. Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
PAGE 7
3M™ Air Tool Lubricant 05/14/15 10.1. Reactivity This material is considered to be non reactive under normal use conditions. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Sparks and/or flames 10.5. Incompatible materials Strong oxidizing agents Reducing agents Strong acids 10.6. Hazardous decomposition products Substance None known. Condition Refer to section 5.
PAGE 8
3M™ Air Tool Lubricant 05/14/15 May cause additional health effects (see below). Additional Health Effects: Single exposure may cause target organ effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. Reproductive/Developmental Toxicity: Contains a chemical or chemicals which can cause birth defects or other reproductive harm.
PAGE 9
3M™ Air Tool Lubricant 05/14/15 For the component/components, either no data are currently available or the data are not sufficient for classification.
PAGE 10
3M™ Air Tool Lubricant 05/14/15 Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1.
PAGE 11
3M™ Air Tool Lubricant 05/14/15 This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.