Datasheet

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

D Sub Junction Shell

Plastic

• Uses standard hardware

• Light weight, compact size

• Full family of sizes

• SeetheRegulatoryInformationAppendix(RIA)in

the“RoHScompliance”sectionof

www.3M.com/Interconnectforcompliance

information(RIAE1&C1apply)

Date Modiﬁed: August 11, 2009 TS-0037-B

Sheet 1 of 2

Physical

Shell:

Material: Glass Filled Polyester (PBT)

Flammability: UL 94V-0

Color: Gray

Insert:

Brass

Tape:

3M +130C Rubber Tape (3485-2X00F Only)

Screw:

(2) 2-56 × .50 Roundhead Steel Zinc

Mounting Hardware:

See Speciﬁcation Sheet TS-0142

Environmental

Temperature Rating:

-55°C to +105°C

PAGE 1
3M™ D Sub Junction Shell Plastic • • • • Uses standard hardware Light weight, compact size Full family of sizes See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3M.com/Interconnect for compliance information (RIA E1 & C1 apply) Date Modified: August 11, 2009 TS-0037-B Sheet 1 of 2 Physical Shell: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Insert: Brass Tape: 3M +130C Rubber Tape (3485-2X00F Only) Screw: (2) 2-56 × .
PAGE 2
3M™ D Sub Junction Shell Plastic Round Cable Application Flat Cable Application #2-56 X 0.15 [3.8] Threaded Insert (2) #2-56 X 0.15 [3.8] Threaded Insert (2) 1.57 [ 39.9 ] A 1.57 [ 39.9 ] .66 Ref [ 16.8 ] .66 Ref [ 16.8 ] A B B C Table 1 Used On 3M Connector Dimensions A Ref B Ref C Ref 8209, 8309 1.30 [ 33.0 ] 0.98 [ 24.9 ] 0.27 [ 6.86 ] 8215, 8315 1.63 [ 41.4 ] 1.31 [ 33.3 ] 0.28 [ 7.11 ] 8225, 8325 2.17 [ 55.1 ] 1.85 [ 47.0 ] 0.34 [ 8.64 ] 8237, 8337 2.82 [ 71.6 ] 2.
PAGE 3
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.