Datasheet

ManualsBrands3M ManualsConnectorsCable socket, blue 3P

Interconnect Solutions

http://www.3M.com/interconnects/

3M and Scotchlok are trademarks of 3M Company.

For technical, sales or ordering information

call your local sales representative

3M™ Mini-Clamp II Socket

2 mm, IDC, Wiremount, Optional Latch 373 Series

Physical

Insulation

Material: Glass Reinforced Thermoplastic Body & Lower Cover, Transparent Thermoplastic Cover

Flammability: UL 94V-0

Color: Black Body, Cover – White & Color (see Table 1)

Contact

Material: Copper Alloy

Plating

Underplating: 1.27-2.54 μm [50-100 μ”] Nickel

Wiping Area: 0.2 μm [8 μ”] Minimum Gold with Lubricant

IDC:

2.0-7.62 μm [80-300 μ”] Matte Tin

Wire Accomodation: Copper Alloy, 7-19 Bare and Tinned Strands, 0.14-0.50 mm

, 20-26 AWG

Wire Insulation: Flexible Vinyl, Semi-Flexible Vinyl, Polyethylene, X-Linked Polyethylene, or PTFE

For approved cables contact your local sales representative

Marking: 3M Logo, Position Indicator, Wire gauge, Insulator Material

Electrical

Current Rating: 3.0 Amps

Voltage Rating: 32 Volts

Insulation Resistance: >1x10

Ω at 600 V

Withstanding Voltage: 1000 V

RMS

at Sea Level

Environmental

Temperature Ratings: -20

C to 85

UL File No: E68080

TS–2234-D

Sheet 1 of 4

Date Modified:3/10/2008

• Designed to accommodate typical wiring specifications

per Europe and North America suppliers.

• Easy, quick and reliable IDC termination

• Integrated cable retention

• Design accepts multiple wire size diameter

• No special tooling needed

• Latch helps enable rugged field termination

• Compact design saves board space

• High number of mating cycles

• RoHS compliant as declared in Regulatory

Information Appendix notes E1 & C1

Designed for Wiring Supplied from Europe and North America

Summary of content (7 pages)

PAGE 1
3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2 mm, IDC, Wiremount, Optional Latch • • • • • • • • • 373 Series Designed to accommodate typical wiring specifications per Europe and North America suppliers.
PAGE 2
3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2mm, IDC, Wiremount, Optional Latch # Positions 3 4 No Latch Wire OD Part # 0.25-0.50 mm 2 20-24 AWG Cover Color Part # 0.14-0.25 mm 2 24-26 AWG Cover Color 1.6 ~ 2.0 [.063~.079] Table 1 1.2 ~ 1.6 [.047~.063] 1.0 ~ 1.2 [.039~.047] 373 Series 0.8 ~ 1.0 [.031~.039] Dim A 13.8 [.54] 15.8 [.62] mm [inch] A206 A165 A124 Tolerance Unless Noted Gray Blue Green .0 .00 B163 B122 mm ±.1 ±.
PAGE 3
M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2mm, IDC, Wiremount, Optional Latch 373 Series # Positions 3 4 With Latch Dim A 23.4 [.92] 25.4 [1.0] Notes: Latch version for panel mounting See page 4 for panel cutout See „No Latch“ for other dimensions Wire OD Part # 0.25-0.50 mm 2 20-24 AWG Cover Color Part # 0.14-0.25 mm 2 24-26 AWG Cover Color Table 2 1.2 ~ 1.6 [.047~.063] 1.6 ~ 2.0 [.063~.079] 1.0 ~ 1.2 [.039~.047] A206 A165 A124 Gray Blue Green 0.
PAGE 4
3M™ Mini-Clamp II Socket Designed for Wiring Supplied from Europe and North America 2mm, IDC, Wiremount, Optional Latch 373 Series TS-2234-D Sheet 4 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M and Scotchlok are trademarks of 3M Company.
PAGE 5
Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC.
PAGE 6
Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive.
PAGE 7
Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.