User Guide

CS INFO:
Image Links:
JOB #: 72278
CLIENT: 3M
COLORS: 4C
Printed @: 100%
FILE NAME: 2-72278 3M Matic 700a Front
DESCRIPTION: 3M Matic 700a 4pg brochure
TRIM: 17 x 11
DATE: 04.30.03 INITIALS: SpF
Name Date
MZ72278_02LW 04-18-03
MZ72278_01300 04-18-03
NOTE:
THIS LASER IS NOT
INTENDED FOR
COLOR PROOFING!
The 3M-Matic
™
700a Adjustable Case Sealer
Productivity by design
3M-Matic
™
700a Adjustable Case Sealer
Specifications
Box
Style: Regular slotted container (RSC).
Bursting test: 125 to 275 lbs. per sq. inch single or double
wall, B or C flute.
Size:
Min Max
Width 6”[150mm] 21.5”[550mm]
Length 6”[150mm] No limit
Height 4.75”[120mm]* 24.5”[625mm]
With masts mounted in upper position.
Height 6.5”[165mm] 28.5”[725mm]
*3.5” [90mm] with taping heads adjusted to apply 2” [50mm] tape
leg lengths and mast stops relocated.
Special modifications may be available for carton sizes not listed
above. Contact your 3M sales representative for information.
Weight: Up to 85 lbs. [38.6kg]
Packing: Contents must support flaps.
Note: The 3M-Matic 700a Adjustable Case Sealer can
accommodate most boxes within the size range listed above.
However, if
Box Length in Direction of Seal
is less than .5
Box Height
boxes should be test run to assure proper machine performance.
Tape:
Scotch brand pressure sensitive box sealing tapes.
Width: 1.5 inches or 36mm minimum to 2 inches or 50mm
maximum. Roll diameter: up to 16 inches [406mm]
diameter on a 3 inch [76.2mm] diameter core.
Machine:
Power Electrical – 115 V, 60Hz, 3.8A, 440 watts, 8ft. [2.4m]
power cord with grounded plug included.
Contact your 3M sales representative for power requirements not
listed above.
Weight:
346 lbs. [157kg] uncrated
401 lbs. [182kg] crated
Operating rate: Up to 30 boxes per minute depending on
box length.
Box drive belt speed: 75 fpm [.38m/s]
Operating conditions: Use in dry, relatively clean environments at
40˚F to 120˚F [4.4˚C to 48.9˚C] with clean dry boxes.
Machine should not be washed down or subjected to conditions
causing moisture condensation on components.
Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY
IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR
USAGE OF TRADE:
3M sells its 3M-Matic™ 700a Adjustable Case Sealer with the following warranties:
1. The Taping Head knife blades, springs and rollers will be free from all defects for
ninety (90) days after delivery.
2. All other Taping Head parts will be free from all defects for three (3) years after
delivery.
3. The gearmotor will be free from all defects for one (1) year after delivery.
4. All other parts will be free from all defects for ninety (90) days after delivery.
If any part is proved to be defective within its warranty period, then the exclusive
remedy and 3M’s and seller’s sole obligation shall be, at 3M option, to repair or
replace the part, provided the defective part is returned immediately to 3M’s factory
or an authorized service station designated by 3M. A part will be presumed to have
become defective after its warranty period unless the part is received or 3M is not
notified of the problem no later than five (5) calendar days after the warranty period. If
3M is unable to repair or replace the part within a reasonable time, then 3M, at its option,
will replace the equipment or refund the purchase price. 3M shall have no obligation
to provide or pay for the labor required to install the repaired or replacement part. 3M shall
have no obligation to repair or replace (1) those parts failing due to operator misuse,
carelessness, or due to any accidental cause other than equipment failure, or (2) parts
failing due to non-lubrication, inadequate cleaning, improper operating environment,
improper utilities, or operator error.
Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special,
incidental or consequential damages based upon breach of warranty, breach of
contract, negligence, strict liability or any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may
be changed only be a written agreement signed by authorized officers of 3M and seller.
3M Industrial Business
Customer Response Center
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
70-0703-8832-0
“3M-Matic,””AccuGlide” and “Scotch” are trademarks of 3M. 36USC380 ©3M 2003
*Infeed/Exit conveyors are optional
**Casters are optional