User Guide

SELF-ADJUSTABLE RANDOM, FULLY AUTOMATIC
3M-MATIC
™
CASE SEALER 800RF
SIDE BELT DRIVE
The 800rf automatically handles a wide range of case sizes — at
up to 8 cases per minute. It’s ideal for lines with random case
sizes and where multiple lines running different size cases
come together for sealing. It features an optically controlled
powered infeed conveyor that separates and holds cases for
metered feeding into the taping area; pneumatic controls that
adjust side belt feeding mechanism; upper flap folding and
AccuGlide
™
II taping heads; Programmable Logic Controller;
pneumatically operated rear flap folder and two finishing plows;
emergency stop buttons; and movable protective side shields
with machine interlock shut-off switches.
SPECIFICATIONS
Box Size: Min Max
Length 10" [250 mm] 24" [610 mm]
Width 8" [200 mm] 19.5" [495 mm]
Height 6" [150 mm] 20" [510 mm]
Weight: 5 lbs. [3 kg] 85 lbs. [38 kg]
Tape Width: For 800rf – 36 mm minimum to 48 mm maximum.
For 800rf3 – 48 mm minimum to 72 mm maximum.
Machine Operating Rate: Up to 8 boxes per minute depending
on case size and case size mix. Rate is dependent on box size,
box size mix and operator dexterity.
3M-MATIC
™
CASE SEALER 1400RF
LUG DRIVE
Provides productivity and automation for demanding packaging
line operations. Ideal for lines with random case sizes and where
multiple lines running different case sizes come together for
sealing. The patented 3M design utilizes a two step, continuous
process to fold all four top flaps and seal the top and bottom of
the case at speeds up to 14 cases per minute. AccuGlide
™
II low
impact taping heads provide precise accurate tape seals.
SPECIFICATIONS
Box Size: Min Max
Length 10" [250 mm] 22" [560 mm]
Width 7.5" [190 mm] 16" [405 mm]
Height 5.5" [140 mm] 20" [510 mm]*
Weight: 10 lbs. [4.5 kg] —
*Maximum case height difference is 7".
Tape Width: 36 mm minimum to 48 mm maximum or 48 mm
minimum to 72 mm maximum.
Machine Operating Rate: Up to 14 cases per minute depending
on box length.
Note: Custom built to customer specifications. Other case sizes
may be accommodated. Case weight requirement at least 10 lbs.
Boxes should be test run to assure proper machine performance.
Please consult with 3M.
The indexing gate and photo eyes separate cases on flooded lines.