User Guide

Apply a printed length of
Scotch
®
Printable Label Tape to
the leading corner of the conveyed
box. Applicators are left hand or
right hand for use on either side
BOXES PER MINUTE
Estimated CA2000 Box Rate
25
20
15
10
5
0
8 101214161820
B
OX LENGTH (INCHES)
Label Sizes:
Label widths available:
2.00'' (50.8mm),
3.00'' (76.2mm), and
4.00'' (101.6mm)
Label
leading leg
Label
trailing leg
Label cut mark
5/8" square
Specifications:
Description:
Operating Rate
and Conditions:
Power and Pneumatic
Requirements:
Agency Approval:
Label length leading leg:
1.375'' (34.9mm) minimum to
6.00'' (152.4mm) maximum
Label length trailing leg:
3.50'' (88.9mm) minimum to
8.00'' (203.2mm) maximum
Tape Roll Diameter:
13.50'' (342.9mm) maximum
Case Sealers:
Designed to work with
CTD 2000, 200a, 700a,
and 700aks.
Note: Minimum box weight
may be required for bottom
belt only case sealer.
Electrical:
100/120VAC, 12A
50/60 Hz
Pneumatic:
75 to 140 PSIG,
70 PSIG factory set point.
Designed to meet CSA
(C-USA) requirements.
3
3M-Matic
™
Corner Label Applicator CA2000
Technical Data May, 2002
of the CTD2000 Conveyor or
3M-Matic
™
case sealers.
Conditions:
A.Temperature:
50°F to 100°F with clean,
dry boxes
B.Relative humidity:
10% to 90%
(non-condensing)
C.Light:
No direct sunlight
Model No: CA2000-T3V1
Print Engines:
Sato
™
8485Se (203 dpi)
standard. 8490S (305 dpi)
optional
Applying Height:
A.Conveyor bed height:
Bed heights from 24.50''
(622mm) to 36.00'' (915mm)
B.Box application:
Label to be applied 1.00''
minimum from bottom
of box.
Up to 24 boxes per minute (depending on box size).