Datasheet

Key use limitation
1. This respirator does not supply oxygen. Do not use in
atmospheres containing less than 19.5% oxygen.
2. Do not use for respiratory protection against atmospheric
contaminants that have poor warning properties or are
unknown or immediately dangerous to life and health
(IDLH) or against contaminants which generate high heats
of reaction with chemical filters.
3. Do not misuse, alter, modify or repair this product.
4. Do not use with beards or other facial hair that prevent
direct contact between face and edge of the respirator.
5. Do not use with unknown concentrations of contaminants.
6. Leave the work area immediately and check the integrity
of the respirator and replace face mask if:
a. Damage has occurred or is apparent.
b. Breathing becomes difficult or increased breathing
resistance occurs.
c. Dizziness or other distress occurs.
d. You taste or smell the contaminant or an irritation
occurs.
7. Use strictly in accordance with respirator and filter user
instruction leaflet.
For full use limitations please refer to the product
user instructions.
Shelf life
Shelf life*: 3 years from production date when stored at
storage conditions described on packaging.
*The shelf life as defined above remains indicative and maximum data, subject
to many external and non-controllable factors. It may never be interpreted as
a warranty.
3M Ireland Limited
The Iveagh Building
The Park, Carrickmines
Dublin 18
Tel.: [phone]
Important notice
The use of the 3M product, described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any
use of this product, it is recommended to complete some trials to validate the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environments. Any action or usage
of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules,
procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or
control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation.
Respiratory Protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to respiratory contaminants. 3M offers advice on the selection
of products, and training in the correct fitting and usage.
For more information on 3M products and services please contact 3M.
Personal Safety Division
3M United Kingdom PLC
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
Tel.: [phone]
www.3M.co.uk/4000plus
Please recycle. Printed in the UK. 3M and Versaflo are
trademarks of 3M Company. © 3M 2019. All rights reserved.
J439823
3M
™
Maintenance-Free Reusable Half Mask 4000+ Series
Materials
Component Material
Facemask Thermoplastic elastomer
Head harness Polyphenylene ether/polystyrene
Head strap Polyisoprene/cotton
Inhalation valve Polyisoprene
Exhalation valve Silicone rubber
Gas and vapour filter body Activated carbon
Particulate filter element Polypropylene
Materials from animal origin are not intentionally added to these products