Cut Sheet

ManualsBrands3M ManualsConnectorsElectrical Insulating Resin, 4N Series, 7.2 Ounce

328

FAX 800-245-0329

SPLICES s2ESIN

Resin

™

3COTCHCAST

™

%LECTRICAL)NSULATING2ESIN

3M Scotchcast Electrical Insulating Resin 4 is a two-part

epoxy insulating and encapsulating resin packaged in ﬁve

sizes. Use 3M Scotchcast Resin 4 to splice solid dielectric

and oil-ﬁlled cables up to 8 kV. Flash point: 300°F (149°C)

or higher.

™

3COTCHCAST

™

%LECTRICAL)NSULATING

AND3EALING#OMPOUND

3M Scotchcast Electrical Insulating and Sealing Compound

2104 is a two-part, low-viscosity polyurethane for

permanent splice protection. This resin is included in the

multi-mold splicing kits.

™

3COTCHCAST

™

2EENTERABLE%LECTRICAL

)NSULATINGAND3EALING#OMPOUND

Shield electrical connections against water damage with

3M Scotchcast Reenterable Electrical Insulating and

Sealing Compound 2123, the most effective moisture

protection available. Unique mix-in-the-bag preparation

of this polybutadiene resin makes the resin easy to prepare

and apply. The visible, re-enterable moisture seal is a

reliable barrier against the constant exposure to water

in certain applications. Often used for potting ﬂush

mounted junction boxes.

™

3COTCHCAST

™

&LAME

2ETARDANT#OMPOUND

3M Scotchcast Flame Retardant Compound 2130

is a ﬂexible, permanent, urethane resin used for jacket

repair or splicing portable cables. It is ﬂame retardant.

™

3COTCHCAST

™

7ET.ICHE

0OTTING#OMPOUND

3M Scotchcast Wet-Niche Potting Compound 2135 is the

ﬁrst “listed” product that meets NEC requirements to allow

the use of rigid nonmetallic conduit in the installation

of wet-niche underwater lighting ﬁxtures. 2135 provides

protection against corrosion and possible deteriorating

effects of pool water by reliably encapsulating the 8 AWG

ground connection in a wet-niche shell. The wet-niche

forming shell is a corrosion-resistant metal housing for

underwater ﬁxtures in permanently installed pools. Article

680-20(b)(1) National Electrical Code. UL Listed 2L02.

Scotchcast 2135 potting compound is packaged in an

easy-mix 1.8-oz. Unipak container. This thixotropic resin

will not sag or drip. The encapsulated connection gels in

minutes and can be submerged within four hours. Each kit

contains enough material to complete one ﬁxture.

Summary of content (2 pages)

PAGE 1
reliable barrier against the constant exposure to water in certain applications. Often used for potting ﬂush mounted junction boxes. SPLICES s 2ESIN Resin 3M 3COTCHCAST %LECTRICAL )NSULATING 2ESIN ™ ™ 3M Scotchcast Electrical Insulating Resin 4 is a two-part epoxy insulating and encapsulating resin packaged in ﬁve sizes. Use 3M Scotchcast Resin 4 to splice solid dielectric and oil-ﬁlled cables up to 8 kV. Flash point: 300°F (149°C) or higher.
PAGE 2
3PECIlCATIONS AND /RDERING )NFORMATION FOR - 3COTCHCAST Resins ™ Product Number UPC (054007-) ™ Size/Type of Package Inner Unit Pack Case Qty. 3M Scotchcast Electrical Insulating Resin 4 4-A 43165 A/3.2 oz. (90 g), 4.8 cu. in. (78,6 cu. cm) – 10 cont. 4-B 43166 B/7.4 oz. (209 g), 11.2 cu. in. (183,5 cu. cm) – 10 cont. 4-C 43167 C/14.7 oz. (418 g), 22.3 cu. in. (365,4 cu. cm) – 10 cont. 4-D 04206 D/22.2 oz. (630 g), 33.6 cu. in. (550,6 cu. cm) – 10 cont. 4-E 04207 E/10.4 oz.