Cut Sheet

5
78-8124-5454-0-C
SEMI-CONDUCTING SHIELD
Precision Molded Semi-Conducting
Insulation Shield provides ground
shield continuity and meets the
requirements of IEEE Standard
592.
COMPRESSION CONNECTOR
Aluminum Compression Connector
is sized to ensure a cool running
connector with maximum current
transfer.
TEE MODULE
Molded Tee Module adapts to all
cable sizes and provides a
deadfront shielded connection.
EPDM INSULATION
High quality peroxide cured EPDM
Insulation is mixed and formulated
for complete control of raw rubber
characteristics.
HEX HEAD
One-inch Hex Head is used to
tighten the connection, and
serves as capacitive test point.
CAP
Semi-Conducting Rubber Cap
fits over test point for
waterproof seal and deadfront
shielding.
INSULATING PLUG
Molded Epoxy Insulating Plug
provides excellent electrical,
thermal and mechanical reliability.
SEMI-CONDUCTING ELECTRODE
Molded Semi-Conducting Electrode
provides corona-free electrostatic
shielding of the compression
connector.
GROUNDING TABS
Provide convenient point for
connecting ground lead to ensure
grounding of the semi-conducting
shield.
CABLE ADAPTER
Molded Cable Adapter, sized to fit
cable insulation diameters from
0.640” to 1.965” (16.3 to 49.9 mm)
provides stress relief for the
terminated cable shield. Included
with Adapter Kits.
CONNECTING PLUG
Molded EPDM
Connecting Plug carries
current between cables.
2-Way Splice
Equipment Connection
Examples:
A
A
12.25”
(311 mm)