Cut Sheet

3M
™
TB Quat Disinfectant
Cleaner Ready-to-Use
Technical Data
July 2012
Description
3M
™
TB Quat Disinfectant Cleaner
Ready-to-Use is a ready-to-use cleaner,
deodorizer, disinfectant, virucide,
tuberculocide, mildewstat, and fungicide.
This product contains 2100 ppm of active
germicide, making it highly effective
against a broad spectrum of pathogenic
microorganisms, including bacteria,
antibiotic-resistant bacteria, viruses,
fungi, mold, and mildew.
Applications
3M
™
TB Quat Disinfectant Cleaner
Ready-to-Use is designed specifically as
a general, non-acid, non-abrasive cleaner
and disinfectant for use in:
 Homes, hospitals, nursing homes,
hotels, and schools
It is formulated to disinfect hard, non-
porous, inanimate environmental
surfaces like:
 Floors, walls, metal surfaces,
stainless steel surfaces, glazed
porcelain, glazed ceramic tile,
plastic surfaces
Note: For plastic and painted surfaces,
test the product in an inconspicuous area
to make sure the product is safe for use.
Packaging
1-quart bottle
12 bottles per case
General Use Directions
It is a violation of Federal Law to use this
product in a manner inconsistent with its
labeling.
3M
™
TB Quat Disinfectant Cleaner
Ready-to-Use is not for use on critical or
semi-critical medical device surfaces.
Disinfection, Deodorizing and
Cleaning: Remove gross filth or heavy
soil prior to application of the product.
Hold container six to eight inches from
surface to be treated. Spray area until it is
covered with the solution. Allow product to
penetrate and remain wet for 3 minutes.
For Bloodborne Pathogens: Allow
surface to remain wet for 1 minute for
HIV-1, and for 5 minutes for HBV and
HCV. No scrubbing is necessary. Wipe off
with a clean cloth, mop, or sponge. The
product will not leave grit or soap scum.
Bloodborne Pathogen Standard: Kills
HIV-1, HBV, HCV, and HAV on pre-
cleaned environmental surfaces or
objects previously soiled with blood
and/or body fluids in health care settings
(hospitals, nursing homes) or other
settings in which there is an expected
likelihood of soiling of inanimate surfaces
or objects, and in which the surfaces or
objects likely to be soiled with blood or
body fluids can be associated with the
potential for transmission of Human
Immunodeficiency Virus Type 1 (HIV-1)
(associated with AIDS), Hepatitis B Virus
(HBV), Hepatitis C Virus (HCV), and
Hepatitis A Virus (HAV).
Special Instructions
For cleaning and decontamination
against HIV-1, HBV, and HCV on
surfaces or objects soiled with
blood/body fluids –
Personal Protection: When handling
items soiled with blood or body fluids,
use disposable gloves, gowns, masks,
and eye coverings.
Cleaning Procedures: Blood and other
body fluids must be thoroughly cleaned
from surfaces and objects before
application of this product.
Contact Time: Allow surface to remain
wet for 5 minutes for HBV and HCV, and
for 1 minute for HIV-1. These contact
times will not control other common types
of viruses and bacteria.
Disposal of Infectious Materials:
Blood and other body fluids should be
autoclaved and disposed of according
to local regulations for infectious
waste disposal.
Mildewstat: To control mold and
mildew on pre-cleaned, hard, non-porous
surfaces, spray surface to be treated
making sure to wet completely. Let air
dry. Repeat application at weekly intervals
or when mildew growth appears.
NOTE:
Refer to product Material Safety Data Sheet for
specific physical properties, health hazard, first
aid and precautionary information.
TB Quat Disinfectant
Ready-To-Use Cleaner
 16-4509-2