User Manual

Check the seal of your adjustable strap
valved ltering facepiece respirator each
time you don the respirator.
Please recycle. Printed in U.S.A.
© 3M 2010. All rights reserved.
70-0707-9707-4
General Offices
3M Center
St. Paul, MN 55144-1000
Helping You
Wear it Right
Place the respirator over your nose
and mouth. Be sure the metal
noseclip is on top.
Wearing your adjustable strap
valved ltering facepiece respirator
1
Pull the bottom strap over your
head until it rests below the ears
at the back of your neck.
2
Pull the top strap over your head
until it rests on the crown of your
head above your ears.
3
Using both hands starting at the
top, mold the metal noseclip
around your nose to achieve a
secure seal.
5
Without removing the respirator,
adjust the straps until the respirator
is secure. To tighten the respirator,
gently pull the ends of both straps.
To loosen the respirator, press on
the back side of the buckle.
4
Adjustable strap valved
ltering facepiece respirators
WARNING
These respirators help reduce exposures to certain airborne particulates. Before use, the wearer must read and understand the User Instructions provided
as a part of the product packaging. A written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134
including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable
jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, supervisor, or call 3M OH&ESD Technical
Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
Place both hands over the respirator and inhale sharply. The
respirator should collapse slightly. If air leaks between the face
and faceseal of the respirator, reposition it and adjust the noseclip
for a more secure seal. If you cannot achieve a proper seal, do not
enter the contaminated area. See your supervisor.

Summary of content (1 pages)