Datasheet

Before using this product, you must evaluate it and determine if it is
suitable for your intended application. You assume all risks and
liability associated with such use.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
as of the date of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair
the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any loss or
damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory
asserted.
Important Notice
3
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 245 3573
Fax [phone]
http://www.3M.com/elpd
Litho in USA.
© 3M 1999 80-6109-4364-1
40% Pre-consumer waste paper
10% Post-consumer waste paper
Application Guide
Part Number Length Primary Jacket Repair Sleeve Dimensions
Inches (mm) Insulation Use Range Expanded Recovered
600/1000v max./min. Diameter Diameter
Conductor Size inches (mm) inches (mm) inches (mm)
AWG/MCM
HDCW 35/10-250 9.8 (250) #8 - 2/0 1.38-0.39 (35-10) 1.97 (50) .32 (8)
HDCW 35/10-1200 47.2 (1200) #8 - 2/0 1.38-0.39 (35-10) 1.97 (50) .32 (8)
HDCW 55/15-500 19.7 (500) 3/0 - 400 2.17-0.59 (55-15) 2.95 (75) .51 (13)
HDCW 55/15-1200 47.2 (1200) 3/0 - 400 2.17-0.59 (55-15) 2.95 (75) .51 (13)
HDCW 80/25-750 29.5 (750) 500 - 1000 3.15-0.98 (80-25) 3.94 (100) .91 (23)
HDCW 80/25-1200 47.2 (1200) 500 - 1000 3.15-0.98 (80-25) 3.94 (100) .91 (23)
HDCW 110/30-1000 39.4 (1000) 1000 - 2000 4.33-1.18 (110-30) 5.20 (132) .98 (25)
HDCW 110/30-1200 47.2 (1200) 1000 - 2000 4.33-1.18 (110-30) 5.20 (132) .98 (25)
HDCW 140/40-1000 39.4 (1000) N/A 5.51-1.57 (140-40) 5.71 (145) 1.26 (32)
HDCW 140/40-1200 47.2 (1200) N/A 5.51-1.57 (140-40) 5.71 (145) 1.26 (32)
2
Sleeve is positioned over splice or damaged area
and closed with metal channel.
3
Heat is applied to shrink the sleeve and melt the
adhesive liner.
4
Finished sleeve is moisture resistant and durable.
Additional Information
In addition to the above 10 stocked sizes, 15 make-to-order
sizes are available. For more information about these non-
stocked sizes, contact your 3M representative or call
1-800-245-3573