Specification Sheet

ManualsBrands3M ManualsAdhesives3M 8320 Carry Handle Tape 1"W x 17"L White, 110 Pads/Case (2750 Handles)



Carry Handles

Product Description 3M™ Carry Handles are durable plastic strips with a non-tacky center

insert and adhesive coated at each end. It is easy to create a convenient

looped handle when the ends are attached to both sides of a box or

package. These handles are available in standard dimensions (see table

below) or dimensions can be customized for your application. “CP”

Carry Handles are custom-printed to provide additional branding

opportunity for retail product, to add bar-codes for bundled packages,

or for other purposes.

Construction

3M™ Carry Handle:

Standard white carry portion material.

3M™ Carry Handle (CP):

Custom printed or colored carry portion material.

Adhesive:

Pressure-sensitive rubber resin. Requires no heat,

moisture or solvent activation prior to use.

Typical

Physical

Properties

Note: The following technical information and data should be considered

representative

or typical only, and should not be used for specification

purposes.

Product #

8310

8310CP

8315

8315CP

8320

8320CP

8330

8330CP

8340

8340CP

8350

8350CP

Max Load Per Handle

(lbs)

Adhesion to Steel

oz/in / N/100mm

D-3330

55 / 60

78 / 85

67/ 73

80 / 88

Tensile Strength

lbs/in /

N/100mm

D-3759

35 / 615

67 / 1174

68 / 1174

190/ 3325

270/ 4728

Elongation at Break (%)

D-3759

160

130

Thickness

Mils / mm

D-3652

Tape

3.20 / 0.081

4 / 0.102

5.6/0.163

7.7/0.196

Carry Portion

Material

3.75 / 0.095

3.75/0.095

Total

6.95 / 0.176

7.75 / 0.197

9.4/0.274

11.5/0.292

Technical Data January 2018

Summary of content (4 pages)

PAGE 1
 Carry Handles Technical Data January 2018 Product Description 3M™ Carry Handles are durable plastic strips with a non-tacky center insert and adhesive coated at each end. It is easy to create a convenient looped handle when the ends are attached to both sides of a box or package. These handles are available in standard dimensions (see table below) or dimensions can be customized for your application.
PAGE 2
3M™ Carry Handles Features • Customer convenience – easier to carry bulky packages. • Custom colors and graphics available for improved branding, promotional messages, or in-store security. • Excellent adhesion to a variety of package surfaces. • Easy to apply. • Stores easily at checkout counters. • Reduces packaging materials.
PAGE 3
M™ Carry Handles Application Techniques Recommended Surfaces • Paperboard printed and unprinted • Corrugated cardboard • Polyethylene and polypropylene (strong shrink film/poly bags) • Polyester film • Polyvinyl chloride (PVC) film Surfaces That Should Be Reviewed For Suitability • Wax coated/siliconized surfaces • Wet surfaces (moisture condensation) • Cold surfaces (< 50°F [10°C]) • Some lacquer coated board • Rough textured surfaces on which tape surface contact is significantly reduced Application In
PAGE 4
3M™ Carry Handles Technical Information The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information.