Datasheet

Datasheet

The QSA test cords provide a means of easy connection to the 3M QSA

modules for testing purposes.

There are 3 versions available depending on the module type to test

and the type of testing. There are 2 version of the QSA 2-pole test

cord, one for use on the QSA series 1, the other for QSA series 2. The-

se cords provide 1 pair with signals a/a‘ and b/b‘. The third version of

cord is a 4-pole test cord for use with QSA series 2 modules and pro-

vides 2 pair with signals a,b,a‘,b‘. All 3 versions are supplied complete

with banana sockets for easy connection to the test equipment.

For easy identification of signals in the 4-pole test cord longer leads

are supplied to denote the a‘ and b‘ signals, the shorter leads denote a

and b signals. The banana sockets are also colour coded with the black

sockets for b and b‘ signals and the white sockets for a and a‘ signals.

Marking of signals at the QSA connector :

To ensure the correct orientation of the test cords within the QSA modules

markings are placed on both the module housing and the test plug. The

2-pole test cords have a black rectangle on the b/b‘ signal side and the

4-pole cord, 4 different rectangles mark the signal. (see below diagram)

QSA

test cords

Features

• Easy connection to the modules

• Banana sockets

Benefits

• Signals are marked at the QSA connector

• Colour marking of signals at equipment side

QSA series 1 2-pole test cord

QSA series 2 2-pole test cord

QSA series 2 4-pole test cord

2-pole test cords 4-pole test cord

b´

a´

PAGE 1
Datasheet QSA test cords The QSA test cords provide a means of easy connection to the 3M QSA modules for testing purposes. There are 3 versions available depending on the module type to test and the type of testing. There are 2 version of the QSA 2-pole test cord, one for use on the QSA series 1, the other for QSA series 2. These cords provide 1 pair with signals a/a‘ and b/b‘. The third version of cord is a 4-pole test cord for use with QSA series 2 modules and provides 2 pair with signals a,b,a‘,b‘.
PAGE 2
Specification Electrical features Umax Imax 200 VDC 100 mA Ordering information Ref. No. QSA series 1 2-pole test cord with two banana sockets, length 0.2 m 79054-555 00 QSA series 2 2-pole test cord with two banana sockets, length 0.2 m 79054-501 00 QSA series 2 4-pole test cord with four banana sockets, length 0.2 m 79054-524 00 3M is a trademark of 3M. Important Notice Buyer and/or user of this 3M product has to make sure before using this product that it is suitable for the intended use.