Installation Guide

Application Guide
3M
™
All Weather Flashing Tape
8067
- 2 -
Fold and fasten
the WRB
2. Fold and fasten the WRB: Fold the header flap up above the window exposing
the sheathing and temporarily tape in place. Fold the side flaps of the WRB into the
opening and staple to inside wall. Fold the bottom flap in and trim the WRB on the
sill to allow the flashing tape to adhere to the wood as shown in Fig. 2A.
Figure 2A: Fold and fasten the WRB
Tape in
place
temporarily
Header flap
folded up
and taped
WRB folded
in, trimmed
and stapled
Exposed sheathing
WRB folded in
and stapled
Wood