Instructions / Assembly

ManualsBrands3M ManualsPaintParticulate Respirator (20-Pack)

Place the respirator over

your nose and mouth. Be

sure the metal nose clip is

on top. With models 8210

or 07048, pre-stretch the

straps before wearing.

Pull the top strap over your

head until it rests on the

crown of your head above

your ears.

Using both hands starting

at the top, mold the metal

nose clip around your nose

to achieve a secure seal.

Pull the bottom strap over

your head until it rests just

below your ears.

Wearing Your Filtering

Facepiece Respirator

Check the Seal of Your Filtering Facepiece

Respirator Each Time You Don the Respirator.

Positive Pressure

User Seal Check

For Non-Valved Respirators

Place both hands completely over the

respirator and exhale. The respirator

should bulge slightly. If air leaks between

the face and faceseal of the respirator, reposition it and

readjust the nose clip for a more secure seal. If you cannot

achieve a proper seal, do not enter the contaminated area.

See your supervisor.

Negative Pressure

User Seal Check

For Valved Respirators

Place both hands over the respirator

and inhale sharply. The respirator should

collapse slightly. If air leaks between the

face and faceseal of the respirator, reposition it and readjust

the nose clip for a more secure seal. If you cannot achieve

a proper seal, do not enter the contaminated area.

See your supervisor.

Please recycle. Printed in U.S.A.

70-0707-9706-6

General Offices

3M Center

St. Paul, MN 55144-1000

Helping You

Wear it Right

Respiratory Products

These respirators help protect against certain airborne contaminates. Before use, the wearer must read

and understand the User Instructions provided as a part of the product packaging. A written respiratory

protection program must be implemented meeting all the requirements of OSHA 1910.134 including

training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met

and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or

death. For proper use, see packaging instructions, supervisor, or call 3M OH&ESD Technical Service in

USA at 1-800-243-4630 and in Canada at 1-800-267-4414.

Filtering Facepiece

Non-Valved Respirator

Filtering Facepiece

Valved Respirator

Summary of content (2 pages)

PAGE 1
Helping You Wear it Right Wearing Your Filtering Facepiece Respirator 1 2 3 4 P lace the respirator over your nose and mouth. Be sure the metal nose clip is on top. With models 8210 or 07048, pre-stretch the straps before wearing. P ull the top strap over your head until it rests on the crown of your head above your ears. P ull the bottom strap over your head until it rests just below your ears.
PAGE 2
Ayudándole a Usarlo Correctamente Cómo usar su respirador de pieza facial filtrante 1 2 3 4 Coloque el respirador cubriendo su boca y nariz. Asegúrese que el clip metálico quede arriba. Con los modelos 8210 ó 07048, pre-estire las bandas antes de colocar el respirador. Lleve la banda superior sobre su cabeza hasta apoyarla en la corona de la cabeza sobre sus orejas. Lleve la banda inferior sobre su cabeza hasta apoyarla por debajo de sus orejas.