Instructions / Assembly

Specifications:

Inlet/Outlet Size: 1/4” Tube with Quick Connect Fittings Flow Rate: 0.6 gpm (2.3 lpm)

Temperature Range: 40-100°F (4.4-38°C) Pressure Range: 30-125 psi (207-862 kPa)

Capacity: 625 gallons (2,366 liters) Weight: 7 lbs (3.2 kg)

Dimensions: 10 7/8”H x 15 3/4”W x 4 1/4”D (28 cm x 40 cm x 11 cm)

Parts Included

Model AP-DWS1000 Drinking Water System

• Drinking water system bracket assembly (includes heads, connections, shutoff meter)

• Filter cartridge #1 (AP-DW80) • Filter cartridge #2 (AP-DW90)

• Saddle valve assembly • Faucet assembly (with blue tubing)

• Tubing (yellow) • Mounting hardware

• Installation, Operation and Maintenance Manual

NOTE: Model AP-DWS1000 LF (Less Faucet) does not include tubing to connect filter system to a drinking

water faucet. The filter system’s outlet connection will accept 1/4” plastic or copper tubing.

Tools Required (not included):

• Drill (cordless recommended) • Phillips head screwdriver

• Adjustable wrench • Razor knife or tube cutter

• #8 Gauge fastening screws appropriate for mounting surface

If a faucet hole needs to be drilled for faucet:

• Center punch • File or grinding wheel

• 9/16” Drill bit (suitable for countertop materials or cast iron/stainless steel)

Note: Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain

connections. The use of saddle-type valves are prohibited in: Alaska, Delaware, Idaho, Kentucky,

Massachusetts, Michigan, Minnesota, New Hampshire, North Dakota, Ohio, Oregon, and South Dakota. Check

your local plumbing codes for any restrictions that apply.

Massachusetts CMR 248 strictly prohibits the use of saddle-type valves. The feedwater connection must

conform to applicable plumbing codes.