Installation Manual

Installation
3M™ Drive-Thru Systems G5 Basestation Model G5B1
Installation Manual
April 24 2015 – Revision 1.0
Page 33 of 76
Power Up
After installation is complete, you can power up the system by plugging in the
base station transformer.
Run Mode Menu
When the system is powered up and functioning normally, the Run mode menu
appears on the display. Figure 16 shows the Run mode menu.
Figure 16
Navigating in the Base Station in Run Mode
To navigate the base station in Run mode you only need to use Enter, Mode, and
the directional arrow buttons: up , down , left ⊳, and right . The
remaining buttons function only in manager or installer configuration modes.