User's Manual

Appendix: Timer Module
3M™ Wireless Communication System Model XT-1
Operating Instructions
August 2013 – Revision 2.0 DRAFT
Page 65 of 75
Report Group Names
Perform the following procedure to change the Report Group Names:
1. Enter the timer configuration menu, see above.
2. Select 4 Customize Names > 2 Report Group Names .
You can define custom report group names to make it easier to
associate events with each other. For example, you may have multiple
detectors on one lane and want them to be shown within the same
report. In addition, an “Email” setting is available for the XT-1. Setting
this value to “Yes” allows for timer data to be sent to an above store
collection device. This feature is reserved for future use.
Day Part Names
Perform the following procedure to change the Day Part Names:
1. Enter the timer configuration menu, see above.
2. Select 4 Customize Names > 3 Day Part Names .
Day parts are customized blocks of time that can overlap with shifts.
Examples of day part names could be Breakfast, Lunch, Dinner, and
Late Night. First customize the Day Part names, then assign the time
periods using Time Definitions.
Shift Names
Perform the following procedure to change the Shift Names:
1. Enter the timer configuration menu, see above.
2. Select 4 Customize Names > 4 Shift Names .
Shifts are customized blocks of time that can overlap with day parts.
Examples of day part names could be First, Second, Third, or Day Shift
and Night Shift. First customize the Shift names, then assign the time
periods using Time Definitions.
Setting up Time Reports
To set up your own time reports you need to define some or all of the
following parameters:
• Goal Times
• Valid Times
• Time definitions
Descriptions for each of the parameters are provided below. The basic
procedure for setting up the parameters is the same for all of them:
1. Enter the timer configuration menu, see above.
2. Locate the parameter you want to change.
3. Change the parameter to the new value.
Set Goal Times
Perform the following procedure to change the Goal Times:
1. Enter the timer configuration menu, see above.