User's Manual

Appendix: Timer Module
3M™ Wireless Communication System Model XT-1
Operating Instructions
August 2013 – Revision 2.0 DRAFT
Page 69 of 75
• If Lane 1 is selected, the running time starts counting when the
vehicle arrives at Order Point 1 and stops when the vehicle
leaves the Pickup Window (or stops if the vehicle is
considered a drive-off).
When the vehicle has completed the transaction selected, the running
time starts counting for the next vehicle in line, starting from the
current running time which is accumulating in the background for each
car in the drive-thru. The time on the remote display only stops
counting when there are no more cars in the drive-thru.
In one special display mode (Group1 & 2), an indicator on the last digit
is used to specify whether the running time represents a vehicle from
Lane 1 or Lane 2. This mode is only valid in a 2MP_Y_Merge
configuration.
Note:
The remote display can be configured to display the current running
time in minutes and seconds (m:ss), or seconds only (sss).
Percent Attained to Goal
The percent attained to goal field has two selections. First, specify
which detector point or report group is displayed.
• Any of the 6 Detector Inputs, or
• Any of the 6 Report Groups, or
• The greet event
Second, specify which time period is used to calculate the value from
the following:
• Full Day, or
• Any of the 8 Day Parts, or
• Any of 4 Shifts.
LED Detector Indicators
The remote timer display comes with 6 LED indicator lights mapped to
the 6 detector inputs. A user may configure each LED to represent a
different detector input. Each indicator is unique, so each detector input
can only be assigned once. LED 1 is the left most indicator and LED 6
the rightmost indicator.
Global Settings
Perform the following procedure to change the Global Settings:
1. Enter the timer configuration menu, see above.
2. Select 6 Configure Timer > 6 Global Settings .
Several system parameters have been gathered under this
heading. They include
• Idle Time Before Resync
• Point to Point Idle Time
• 4 different Email Triggers (For future use)
• System Configuration (Described in section Drive-Thru
Template)