User's Manual
Appendix: Timer Module
3M™ Wireless Communication System Model XT-1
Operating Instructions
August 2013 – Revision 2.0 DRAFT
Page 71 of 75
System Configuration
As mentioned previously, the system configuration field is used to
apply one of a few provided drive-thru templates most closely
matching each store’s requirements. The following are modified when
a configuration is selected.
• Custom Names
• Report Groups
• Timer Goals
• Remote Display Settings
Viewing Time Reports
The main timer screen shows you the time reports configured for your
system.
>Jun/16/2010<|< Breakfast >|<Day Part>
Lane 1 |06:00 to 10:30|Total=117
Except = 0015|AVG.|GOAL|OVER|Attained
OrderPoint1 |1:25|1:00|0031|079.05%
Following is a definition of the items on the above screen:
>JUN/16/2010<
The date selected for the report data.
The timer system shows, at a maximum,
the last 7 days of data available.
< Breakfast >
The time period report sub-type. The
custom names that appear are user-
specified during configuration.
<Day Part>
The time period report type. This can be
Full Day
,
Day Part
,
Shift
,
Hour
, or
OneEvent
Lane 1
The report group name. The report
groups names are user-specified. A
typical use for group names is to
separate one drive through lane from
another (e.g., “Lane 1” and “Lane 2).
06:00 to 10:30
The time slot for the day part you are
currently viewing (in this case
Breakfast
).