User's Manual

Appendix: Timer Module
August 2013 – Revision 2.0 DRAFT
Page 72 of 75
3M™ Wireless Communication System Model XT-1
Operating Instructions
Total = 0117
The total number of vehicles counted in
the data summary for the current time
period.
Except = 0015
The number of vehicles removed from
the data summary for the current period.
Typically Drive-on or Drive-off cars.
OrderPoint_1
The name of the input source for which
the report data pertains. This can be any
of the 6 detectors, Greet Event, or any of
the 6 report groups.
AVG.
1:25
The average time of the input source (in
this case, OrderPoint1 ) currently
displayed over the time period selected.
GOAL
1:00
The goal time of the input source (in this
case, OrderPoint1 ) currently
displayed.
OVER
0031
Total number of vehicle times that have
exceeded the goal time.
Attained
079.05%
Percentage of vehicle times meeting the
goal time. (Total-Over)/Total
When viewing the Timer Report screen, pressing the Service key on the
keypad rotates between all Report Groups configured for the Timer
System. The name field, located under the date, will advance to the
next Report Group, and the timer data values re-calculate. If there are
no points assigned to a Report Group, it is skipped in the rotation.
When viewing the Timer Report screen, pressing the Up or Down
arrows rotates between all point defined in the selected Report Group.
For example, if the store is configured for a 2MP_Y-Merge
configuration, and Lane 1 is the Report Group selected, the rotation
would be:
• Group Total
• OrderPoint1
• Pay Window
• Pickup Win
• Greet Event
• Group Total