User Guide

SIC Code
1796 – Installation Building Equipment 3534 – Elevators and Moving Stairways
Key Decision Makers
Elevator Designers, Construction Engineers, Building Maintenance Supervisors.
Product Information
Adhesive
Acrylic
Acrylic
Acrylic
Product
Number
4930
4950
4951
4959
Thickness
0.025”
(0.64 mm)
0.045”
(1.1 mm)
0.045”
(1.1 mm)
0.120”
(3.0 mm)
Description
White, closed-cell acrylic
foam carrier. All-purpose
adhesive.UL Listing 746C.
White, closed-cell acrylic
foam carrier. Can be applied
as low as 32° C (0°).
White, closed-cell acrylic
foam carrier. All-purpose
adhesive. UL Listing 746C.
Temperature
Resistance
Min/Hrs
300° F
(149° C)
300° F
(149° C)
400° F
(204° C)
Days/Wks
200° F
(93° C)
200° F
(93° C)
300° F
(149° C)
Relative
Adhesion
Shear
Very
High
Very
High
Very
High
Peel
Very
High
Very
High
Very
High
Solvent
Resistance
Very High
Very High
Very High
Note: This technical information and data provided here should be considered representative or typical only, and should not be used for specification purposes.
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144
“VHB” is a trademark of 3M
Printed in USA
I_beam.pdf
© 3M 2005
For Additional
Information
To request additional product information or to arrange for sales assistance, call
1-800-362-3550. Address correspondence to: 3M Industrial Business Customer
Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144. Our fax
number is 651-778-4244. In Canada, phone: [phone]. In Puerto Rico, phone: 1-
787-750-3000. In Mexico, phone: [phone].
Important Notice
User is responsible for determining whether the 3M product is fit for a particular purpose and
suitable for user’s method of application. Please remember that many factors can affect the
use and performance of a 3M product in a particular application. The materials to be bonded
with the product, the surface preparation of those materials, the product selected for use, the
conditions in which the product is used, and the time and environmental conditions in which
the product is expected to perform are among the many factors that can affect the use and
performance of a 3M product. Given the variety of factors that can affect the use and
performance of a 3M product, some of which are uniquely within the user’s knowledge and
control, it is essential that the user evaluate the 3M product to determine whether it is fit for
a particular purpose and suitable for the user’s application.
Limitation of Remedies
and Liability
If the 3M
™
VHB
™
Tape is proved to be defective within the warranty period stated above,
THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND THE
PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M
™
VHB
™
TAPE. 3M shall not otherwise be liable for any loss or damages, whether direct, indirect,
special, incidental, or consequential, regardless of the legal theory asserted, including, but
not limited to, contract, negligence, warranty, or strict liability.
Limited Warranty
3M warrants for 24 months from the date of manufacture that 3M
™
VHB
™
Tape will be
free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty does not cover damage resulting from the use or inability to
use 3M
™
VHB
™
Tape due to misuse, workmanship in application, or application or storage
not in accordance with 3M recommended procedures.