User Guide

Process
3M
™
Double Coated Film Tape 9573 is pressed into place in the desired location on the blind fabric and the liner is
removed. The bottom flap is folded over a weight and pressed onto the strip of double coated film tape. The blind fabric
section then continues on in the assembly process.
Related Product
3M
™
Double Coated Tissue Tape 9456 – 5.0 mil thick 3M
™
High-strength Adhesive 340 for application to low surface
energy materials.
Related Application Ideas
Bonding of fabric to steel or aluminum rollers for window shades.
Key Decision Makers
Product Manager
Design Engineer
Production Manager
Bonding Systems Division
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000
Printed in USA
Fpdb9573.qxd
© 3M 1999
For Additional Information
To request additional product information or to arrange for sales assistance, call 1-800-328-1681.
Address correspondence to: 3M Bonding Systems Division, 3M Center, Building 220-7E-01, St. Paul,
MN 55144-1000. Our fax number is 651-258-7511. In Canada, phone: [phone].
In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
Fax-on-Demand: 1-800-223-7427, 1-415-596-4402 outside U.S. and Canada.
3M website: http://www.mmm.com. E-mail: [e-mail].
Important Notice
The 3M product will be free from defects in material or manufacture for a period of one (1) year from the
date of purchase. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user’s method of application. Please remember that many factors can
affect the use and performance of a 3M Bonding Systems Division product in a particular application. The
materials to be bonded with the product, the surface preparation of those materials, the product selected for
use, the conditions in which the product is used, and the time and environmental conditions in which the
product is expected to perform are among the many factors that can affect the use and performance of a
3M product. Given the variety of factors that can affect the use and performance of a 3M product, some
of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M
product to determine whether it is fit for a particular purpose and suitable to the user’s method of
application.
Limitation of Remedies
and Liability
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL
BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M
PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract,
negligence, warranty, or strict liability.