User Guide

Key Decision Makers
Designers
Construction Engineers
Building Maintenance Supervisors
Industrial Tape and Specialties Division
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000
Recycled Paper
40% pre-consumer
10% post-consumer
Printed in USA
363_3633.qxd
© 3M 1997
For Additional Information
To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address
correspondence to: 3M Industrial Tape and Specialties Division, 3M Center, Building 220-7E-01, St. Paul,
MN 55144-1000. Our fax number is 651-733-9175. In Canada, phone: [phone]. In Puerto Rico,
phone: [phone]. In Mexico, phone: [phone].
Important Notice
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and
suitable for user’s method of application. Please remember that many factors can affect the use and
performance of a 3M ITSD product in a particular application. The materials to be bonded with the
product, the surface preparation of those materials, the product selected for use, the conditions in which
the product is used, and the time and environmental conditions in which the product is expected to perform
are among the many factors that can affect the use and performance of a 3M ITSD product. Given the
variety of factors that can affect the use and performance of a 3M ITSD product, some of which are
uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M ITSD product
to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Limitation of Remedies
and Liability
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL
BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M
PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or
strict liability.
Product
Number
363
3633
Tape Structure
(Backing/Adhesive)
Aluminum/Glass
Cloth/Silicone
Aluminum/Glass
Cloth/Acrylic
Note: This technical information and data provided here should be considered representative or typical only and should not be used for specification purposes.
Backing Thickness
mils (mm)
3.4 (0.09)
3.4 (0.09)
Total Thickness
mils (mm)
7.4 (0.19)
5.7 (0.14)
Adhesion to Steel
oz./in. (N/100 mm)
54 (59)
70 (77)
Tensile Strength
lbs./in. (N/100 mm)
111 (1944)
140 (2452)
Temperature Range
F° (C°)
-65 to 600°
(-54 to 316°)
-40 to 300°
(-40 to 149°)