Cut Sheet

1 of 2 3
3M™ Comfort Grip Gloves
Product
Description
3M Comfort Grip Gloves offer a comfortable alternative to the traditional cotton and
leather work glove. The gloves are constructed from a nylon knit material which offers a
comfortable, breathable fit and are perfectly suited for applications where hand flexibility
and dexterity are needed. The coated palm provides gripping ability in wet or oily
applications. The Comfort Grip Cut Resistant gloves are an excellent choice for
applications when working with sharp tools or edges. The 3M Comfort Grip Winter
Gloves helps keep hands warm in colder climates.
Data Sheet September 2015
Agency Approvals
& Self
Certifications
Standard
Mechanical
Risks
Model
CG-GU
Model
CG-CR
Model
CG-CRE
Model
CG-W
ANSI 105-2011
1
Blade Cut Res. N/A Level 3 Level 2 N/A
EN 388
Abrasion Res Level 4 Level 4 Level 4 Level 4
Blade Cut Res. Level 1 Level 5 Level 3 Level 1
Tear Res. Level 2 Level 4 Level 4 Level 2
Puncture Res Level 2 Level 4 Level 3 Level 1
Test Methods:
1
ASTM F1790-05
Test levels only indicative of the palm area.
Materials
Model CG-GU Nitrile Foam / Nylon Fiber
Model CG-CR Nitrile Foam / UHMWPE Glass/Nylon Fiber
Model CG-CRE Polyurethane Palm / HPPE / Synthetic Yarns
Model CG-W Nitrile Foam / Polyester / Spandex
Note: Gloves may contain ingredients known to be a possible cause of
irritation and/or allergic reaction in persons sensitive to such materials.
Immediately seek medical advice if an allergic reaction should occur.
Glove Sizing
It is important to order the right size to insure the best protection and most comfortable
fit. Sizes are determined by measuring the circumference of the hand with a tape
measure in inches just below the knuckles with the hand closed. These measurements
will not account for all possible variations in hand size.
Size #
8 9 10
Size
M L XL
Care Instructions
Gloves are hand and machine washable. Do not use chlorine or oxygen bleach. Hang
glove to dry in shaded area. Performance characteristics may degrade due to
laundering.