User Guide

107
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
Product
number
Product
Type
1
Dimensions
2
(length x width)
or diameter for
circular parts
inch (mm)
Functional
Size/Area
square inches
(square cm)
Engaged
Thickness
3
inches
(mm)
Through
hole
diameter
Spacing
(on centers)
between
holes
inch (mm)
Comments
Temperature Range
from -20°F to 250°F
(-29°C to 121°C)
3M
™
Dual Lock
™
- Piece Parts
Counter-
bored
hole
diameter
inches
(mm)
SJ3251 250 1 1/8" (28.5) 0.88 (5.68) 0.323 (8.20) 0.38 (9.5) 0.19 (4.9) - Attach using screws, rivets,
SJ3755 250 0.91 (5.87) 0.323 (8.20) 0.31 (7.9) 0.16 (4.1) - etc. Circular profile reduces
SJ3762 400 0.91 (5.87) 0.288 (7.31) 0.31 (7.9) 0.16 (4.1) - chance for edge lift.
SJ3263 250 13/16" (20.6) 0.44 (2.84) 0.288 (7.31) 0.31 (7.9) 0.16 (4.1) -
SJ3463 400
SJ3763 400 -
SJ3235 400 13/16" (20.6) 0.42 (2.71) 0.288 (7.31) 0.35 (9.0) 0.16 (4.1) -
SJ3465 400 9/16" (14.3) 0.17 (1.10) 0.288 (7.31) 0.31 (7.9) 0.16 (4.1) -
SJ3238 250 1 1/8" (28.6) .99 (6.39) 0.323 (8.20) - - -
SJ3252 400 1.5" x 1.5" 2.08 (13.4 ) 0.288 (7.31) 0.33 (8.3) 0.16 (4.2) 1" (25.4)
(38.1 x 38.1)
SJ3261 2.11 (13.6 ) 0.288 (7.31) 0.29 (7.5) 0.14 (3.6) 1" (25.4) 15 mils (0.4 mm) thicker
than SJ3767.
SJ3767 0.273 (6.93) 0.29 (7.5) 0.14 (3.6) 1" (25.4) 15 mils (0.4 mm)
thinner than SJ3261.
SJ3204 250 1" x 1" 1.0 (6.45) 0.288 (7.31) - - -
(25.4 x 25.4)
SJ3481 400 4 ft x 1" or 2" Dependent on 0.288 (7.31) - - - Excellent for custom
(1.22 m x 25.4 final length cutting rectangular pieces.
or 50.8) See SJ3766, SJ3768 or
SJ3799 for ultrasonic
attachment version.
Flange Flange
Width Thickness
inch (mm) inch (mm)
SJ3736 170 1" x 1.22" 1.0 (6.45) 0.288 (7.31) - 0.079 (2.0) 0.049 (1.25) Allows quick and easy
(25.4 x 30.7) installation or replacement.
SJ3717 400 - 0.079 (2.0) 0.049 (1.25)
SJ3227 250 5/8" x 1" 0.48 (3.10) - 0.098 (2.5) 0.079 (2.0)
(16 x 25.4 )
SJ3228 400 25/32" x 25/32" 0.43 (2.77) - 0.098 (2.5) 0.079 (2.0)
(20 x 20)
SJ3229 250 1" x 1" 0.76 (4.90) - 0.098 (2.5) 0.079 (2.0)
(25.4 x 25.4)
SJ3750 400 32 mm 1.95 (12.58) 0.303 (7.70) - 0.079 (2.0) 0.049 (1.25)
x 50 mm
SJ3248 250 1" x 1.1" 0.79 (5.10) 0.298 (7..57) - 0.137 (3.5) 0.52 (1.32)
(25.4 x 28)
Circle with a counterbored center hole
Circle with no hole
Rectangle with two counterbored holes
Rectangle with no holes
Rectangular slide-in (2 edges cut down forming a flange) for mounting into a bracket