User Guide

111
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
5600 SJ-5632 31 Polyurethane Clear “Clear” Rollstock great Acrylic 1.0 80# 4.8 70 Shore A 25 9” x 72 yd UL
Acrylic SJ-5616 62 where “invisible” die A-20 Paper 9” x 36 yd
SJ-5608 125 cuts are needed.
5800 SJ-5832 31 Polyurethane Black, UL 94HB recognized. Natural 2.0 60# 3.6 70 Shore A 22 13.5” x 72 yd UL
Natural SJ-5816 62 Brown Rubber Paper 13.5” x 36 yd
Rubber SJ-5808 125 R-30
5900 SJ-5916 62 Polyurethane Black UL 94HB recognized, Acrylic 2.0 80# 4.8 36 Shore A 25 13.5” x 36 yd UL
Acrylic SJ-5908 125 Foam except for SJ-5916. A-20 Paper 13.5” x 18 yd
SJ-5904 250
6000 SJ-6032 31 Polyurethane Black, UL 94HB recognized. Acrylic 2.0 80# 4.8 70 Shore A 25 13.5” x 72 yd UL
Acrylic SJ-6016 62 Brown A-20 Paper 13.5” x 36 yd
SJ-6008 125
6200 SJ-6232 31 Polyurethane Black Fast bonding,
Synthetic 2.0 60# 3.6 70 Shore A 55 9” x 72 yd UL
Synthetic SJ-6216 62 permanent adhesion. Rubber 9” x 36 yd
Rubber SJ-6208 125 UL 94HB recognized. R-25
3M
™
Bumpon
™
Protective Products – Resilient Rollstock
Series Product Tape Construction Color Comments Adhesive Liner Product Adhesion Master Specs
Caliper
Backing Type Thickness
Type Thickness
Hardness to Steel Size
Mils (Facestock) Mils Mils oz./0.5 inch oz./0.5 in.
ASTM-D 2240
Adhesive Natural Rubber Acrylic Synthetic Rubber
(R-30) (A-20) (R-25)
Adhesion (Peel)
Low Surface Energy Good Poor Excellent
High Surface Energy Good Good Excellent
Static Shear
75°F Excellent Excellent Excellent
120°F Fair Excellent Good
158°F Poor Excellent Fair
Initial Adhesion
Low Surface Energy Good Poor Excellent
High Surface Energy Good Fair Excellent
Adhesion Buildup Some Gradual Some
Solvent Resistance Good Excellent Good
Age Life Good Excellent Good
Resilient 5800 series 5600 series 6200 series
Rollstock 5900 series
Features 6000 series
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.