User Guide

BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
11
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Adhesive Families
400 Acrylic Adhesive
• Good low temperature
performance and peel strength
on many surfaces.
• Up to 250°F short-term heat
resistance.
• Excellent adhesion to uncoated
papers.
• Clarity and UV resistance for
window label applications.
420 Acrylic Adhesive
• Up to 450°F short-term heat
resistance.
• High tack adhesive.
430 Acrylic Adhesive
• Up to 350°F short-term heat
resistance.
• Lead for high temperature splicing.
550 Permanent Bond Acrylic
• Provides permanent bond strength
to a wide variety of surfaces.
• Because the adhesive level neither
builds nor degrades over time, it
will remove cleanly from most
HSE materials.
553 Low Outgassing Permanent
Bond Acrylic (medium shear)
• Provides permanent bond strength
to a wide variety of surfaces.
• Because the adhesive level neither
builds nor degrades over time, it
will remove cleanly from most
HSE materials.
• Low outgassing exceeds most OEM
specifications for outgassing.
563 Low Outgassing Permanent
Bond Acrylic (high shear)
• Provides permanent bond strength
to a wide variety of surfaces.
• Because the adhesive level neither
builds nor degrades over time, it
will remove cleanly from most
HSE materials.
573 Permanent
Low Outgassing Acrylic
• High peel strength.
• High shear strength even at
350°F temperature.
• Low outgassing, exceeds most
OEM specifications for outgassing
performance.
700 Series Synthetic Rubber
• Up to 200°F short-term heat
resistance.
• Good adhesion to low
surface energy substrates.
• For indoor and room
temperature applications.
800 Series Natural Rubber
• Up to 200°F short-term heat
resistance.
• Offers good adhesion to a
variety of surfaces.
• For indoor and room
temperature applications.
900R Miscellaneous
Rubber Adhesive Group
• Excellent initial adhesion and
high bond to a variety of foams.
• Utility rubber-based adhesive
ideal for the foam fabricating
industry.
1000 Series Repositionable Acrylic
• Good holding to many
surfaces.
• Clean removal.
2000MP Optically Clear Acrylic
• Visual accuracy - light
transmission > 99%, free of
birefringence, refractive index
of 1.47.
• High cohesive and peel strengths.
• High temperature, humidity, and
UV light resistance.
• Long-term durability without
yellowing, delaminating, or
degrading.
Electronically Conductive
• Good initial tack.
• Non-corrosive adhesive.
• Built-in conductive fibers.
• Helps reinforce tape.
• Low electrical resistance
with good conductivity.
Thermally Conductive
• High performance acrylic adhesive
with highly conductive ceramic
particles.
• For an extremely reliable
thermal interface.
• Highly conformable.
Screen Printable Adhesive
• For selective placement of pressure
sensitive adhesive using screen
print technology.
• Either UV curable or water-based
are available.