User Guide

25
BONDING
TAPES
PERFORMANCE
LABEL
MATERIALS
COMMERCIAL
GRAPHICS
RELEASE
LINERS AND
PRINTABLE
FILMS
SINGLE COATED
TAPES
RECLOSABLE
FASTENERS
SPECIALTY
PRODUCTS
FLEXOGRAPHIC
MOUNTING
Adhesive Product Description/Application Ideas Tape Carrier Liner Master Adhesion Chem. Temp Range
Family Cal. Type Type Caliper Size Metal HSE LSE Foam Resist. Low High
Mils Mils Plastic Plastic °F °F
3M
™
Double Coated Tapes
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Specs
700/745/760 443PC Bond styrene extrusions. Attach 5.0 PET 62# PCK 4.2 48" x 108 yd 8 9 9 2 2 -40 200
Synthetic point-of-purchase displays.
Rubber
9443NP High tack rubber adhesive with good 6.0 HDPE 62# DK 4.0 27" x 360 yd
adhesion to most plastics.
9579 Core starting on metal cores. 9.0 HDPE 62# DK 4.0 27" x 360 yd
9589 Carpet attachment. 9.0 HDPE 62# DK 4.0 27" x 360 yd
830/850/860 401B Used for mounting rubber or 9.0 Paper 54# DK 3.0 46" x 108 yd 8 8 8 5 1 -40 180
Natural photopolymer printing plates.
Rubber
410B Core starting/end tabbing of papers, 5.0 Paper 54# DK 3.0 46" x 360 yd 8 8 8 5 1 -40 200
films, and foils.
442KW Mounting pads to polishing disks. 4.0 PET 72# PCK 4.6 54" x 320 yd 8 8 8 5 1 -40 180
442F Film linered version of 442KW. 4.0 PET PET 3.0 54" x 320 yd
456CR Same as 442F with low tack blue 4.0 PET PET 3.0 54" x 320 yd 5 5 5 5 1 -40 180
adhesive on backside for easy removal
900R 9851 Rubber adhesive for high-bond 3.5 PET 60# DK 3.5 54" x 250 yd 10 9 9 5 4 -40 200
Rubber strength.